User manual

Email your order to us at [e-mail]
6
Code AU11SA £129.41
AU-11SA Audience HDMI Audio De-Embedder Repeater
The AU-11SA is an advanced solution for HDMI to
HDMI repeating with Audio de-embedding. It is
compatible with v1.3 HDMI specifications, a cutting
edge technology which defines the transfer of deep
colour (12 bit) video with a high bandwidth of up to
225Mhz. Connect to source and display (HDMI), select
the required audio format & output your audio format
to your amplifier.
Features:
• Compliant with V1.3 HDMI, HDCP 1.1 and DVI1.1
• Decodes HDMI audio to analogue and digital
• Corrects digital error and automatically provides
equalisation up to 40dB
• Supports high definition input up to 1080p
– output resolution follows input
• Supports HDMI signal amplification and equalisation
output for repeater function – can be used to extend
up to 35m
• Supports uncompressed digital LPCM 7.1 / 5.1 or
2 channels & compressed digital Bitstream through
HDMI input and output ports
• Supports LPCM 7.1 / 5.1 or 2 channels output
through multi-channel output ports
• Supports digital Dolby 5.1/ 2 and LPCM 2 channel
output through Optical Toslink
Code PU304 £115.44
Digital Audio over CAT6
The PU-304-KIT is designed to send digital audio signals
over 150m. This device supports both Coaxial and
Optical signals and can transmit these signals up to
150m. The PU-304-KIT can be powered using a USB
cable or the supplied PSU adaptor for added flexibility in
a compact design. Digital SPDIF signals are supported
up to a sample rate of 96Khz, and support for Stereo
and Multichannel digital audio (LPCM, DTS, Dolby
Digital, Dolby Digital Plus), also provided.
Features
• Supports Coaxial or Optical digital audio SPDIF signals
• Supports Stereo and Multichannel digital audio (LPCM,
DTS, Dolby Digital, Dolby Digital Plus)
• Supports sample rate up to 96kHz
• Dual transmission 1 x Coaxial and 1 x Optical
• Signals can be extended over single CAT5e/CAT6
up to 150m
• Power 5V/1A, DC (US/EU standards, CE/FCC/UL
certified)
• Dimension: PU-304RX) 55mm (W) x 85mm
(D) x 22mm (H) (PU-304TX) 55mm (W) x 85mm
(D) x 22mm (H)
HDMI Audio Embedder with
built in Repeater
The AU-11CA Audio Embedder lets you insert an external
audio signal into any HDMI source. The device allows you to
insert analogue or digital stereo and multi-channel digital
surround sound signals (via Optical) to give users the
capability to overcome audio issues within complex HDMI
installation. The AU-11CA also repeats the HDMI signal to
allow an extended total HDMI cable range.
Features:
• Compliant with HDMI v1.3 , HDCP 1.2 and DVI 1.0
• Supports Optical Sample Rate up to 96 kHz
• Supports LPCM Stereo, DTS and Dolby Digital via Optical
input
• Supports up to 24bit resolution digital audio
• HDMI cable distance testing showed that with 1080p
8bit/12bit resolution, the input/output distance is up to
10 meters
• Low power consumption
• Supports HDMI Sample Rates up to 192 kHz
Specification:
• Inputs 1 x HDMI, 1 x Optical, 1 x Analogue Stereo (2 x
RCA)
• Outputs 1 x HDMI
• Power 5V/1A DC (US/EU standards, CE/FCC/UL certified)
• Dimensions 85(D) x 85(W) x 35(H)mm
Code AU11CA £122.31
HDMI Audio De-Embedder (5.1)
with built in repeater
The AU-11CD is an advanced solution for repeating HDMI
with integrated Audio de-embedding, up to 5.1. Connect
the AU-11CD between your source and display via HDMI,
and select the audio format required.
Features:
• Compliant with v1.3 HDMI, HDCP 1.2 and DVI 1.0
• Supports HDMI Sample Rates up to 192 kHz
• Supports Optical Sample Rate up to 48 kHz
• Supports TMDS clock frequency rate 225MHz
• Supports high-bit-rate (HBR) audio
• Input and Output HDMI cable length can run up to 10m
at 1080p 8bit resolution
• Low power consumption
• Support built-in audio EDID switch of LPCM2, 5.1/7.1
or Bitstream
• Supports 3D signals
Specification:
• Inputs 1 x HDMI
• Outputs 1 x HDMI, 1 x Optical (Toslink), 2 x Analogue
Audio L/R (RCA)
• Power 5V/1.2A, DC (US/EU standards, CE/FCC/UL
certified)
• Dimensions 90mm (W) x 85mm (D) x 35mm (H)
Code AU11CD £122.31
Analogue Audio Lip Sync Corrector
This analogue stereo Lip Sync Corrector is a small
device for delaying audio signal to overcome audio
sync issues. The AU-D18 Lip Sync corrector is able to
adjust the timing to the display/amplifier so that users
may received both video and audio in sync. No more
annoying sound mismatch. The Lip SyncCorrector is
easy to use with a simple setup and an affordable unit
for sound delaying.
Features:
• Lip Sync corrector with adjustable delay between
0 & 300ms
• Sample Rates 48 kHz
• Analogue to analogue signal bypass
• Low power consumption
Specifications:
• Inputs 2 x Analogue Audio (L/R stereo)
• Outputs 2 x Analogue Audio (L/R stereo)
• Power 5V/1A DC
• Dimensions 45(D) x 45(W) x 25(H)mm.
Code AUD18 £63.25
Digital audio convertors
Convert digital optical audio signals (TOSlink) into RCA
coaxial (S/PDIF) and vice versa.
Dimensions: 20mm x 71mm x 46mm
Power supply 6vDC 250mA (included)
Code KAOC optical to coaxial £19.99
Code KACO coaxial to optical £19.99
DAC Digital to Analogue audio
with USB interface
DAC with USB audio interface and headphone
amplifier. The most affordable and effective way to
upgrade any CD/DVD player, computer, games console
or network device to high-end sound quality. The DAC
has one optical, one coaxial, and one USB inputs for
up to three digital sources.
DAC is the ideal convertor for music lovers seeking an
excellent value upgrade to 24 bit advanced HD (high
definition) audio.
Code DAC £39.00
Audio