User manual

Find product information and data sheets on www.keene.co.uk
7
HDMI Audio Amplifier
This is effectively an HDMI switcher that allow you to
embed or de-embed audio from multiple sources. It
delivers a powerful 30W per channel and has IP
connectivity for easy ipad/tablet control. Well worth a
look for any AV multi-room installation.
Features:
•
30W per channel digital stereo Amplifier
• Inputs: HDMI x 2, 1 x L/R Stereo audio, 1 x Optical,
1 x Digital Co-Ax, 1 x 3.5mm Stereo
• Outputs: 1 x HDMI, 1 x Optical, 1 x Digital Co-Ax,
1 x L/R Stereo (Line Level output), Speaker Terminals
• Control via remote control, RS-232 or IP (Web GUI
or Telnet)
• Dedicated Microphone input for commercial
application
• Supports Digital to Analogue (DAC) and Analogue
to Digital (ADC) conversion
• Simultaneous audio outputs
• Compact design for remote application
Specifications:
Inputs 2x HDMI [2x HDMI Uncompressed AV and Data]
1x XLR [1x Microphone]
1x Toslink [1x Optical - 2 Channel LPCM]
1x RCA [1x Coaxial - 2 Channel LPCM]
2x RCA [1x Analogue - Stereo (L/R)]
1x 3.5mm Stereo mini-jack [1x Analogue - Stereo(L/R)]
1x RJ45 [1x IP Control]
1x 3.5mm Stereo mini-jack [1x Infra Red Receiver]
1x 9pin Dsub [1x RS-232 Data]
Outputs 1x HDMI [1x HDMI Uncompressed AV and
Data]
1x Toslink [1x Optical - 2 Channel LPCM]
1x RCA [1x Coaxial - 2 Channel LPCM]
2x RCA [1x Analogue - Stereo (L/R)]
4x Speaker Binding Posts [1x Speaker Level Stereo
Output]
PSU: 24V/4.16A
Dimensions 255mm [W] x 170mm [D] x 48mm [H]
Code AUA300 £395.03
HDMI Audio Amplifier with HDBaseT
All the features of the AUA300 above with the added
benefit of integrated HDBaseT input and output. This
means it can be used for creating additional HDBaseT
zones or used to repeat the signal to further HDBaseT
2-Channel Digital AV Receivers.
Code AUA300HBT £574.61
HDMI Audio Extractor
The HDMI Audio Extractor is a device that allows you to
extract audio signals from your HDMI source. When
connecting with a TV or display you dont always get great
audio, or in the case of a display, no audio at all, so with
this Audio Extractor you can take your original HDMI audio
signal and convert it to Digital Toslink or analogue L/R
audio. What this means is that you can output your audio
signal to external speakers or extend your audio signal, the
HDMI Audio Extractor is the perfect choice.
Features:
Compliant with HDMI 1.3, HDCP 1.2 and DVI 1.0
Supports HDMI Sample Rates up to 192 kHz
Supports Optical Sample Rate up to 48 kHz
Supports TMDS clock frequency rate 225MHz
Supports high-bit-rate (HBR) audio
HDMI cable distance testing showed that with 1080p 8bit
resolution, the input & output can run up to 15 meters
Low power consumption
Supports built-in audio EDID switch of LPCM2,5.1/7.1
or Bit stream
Specifications:
Input Port 1 x HDMI
HDMI Sample Frequency Up to 192 kHz
Optical Sample Frequency Up to 48 kHz
Output Ports: 1 x HDMI, 1 x Optical, 1 x analogue L/R
HDMI Audio Format: PCM2/5.1/7.1, Dolby 5.1, DTS 5.1,
DD+, D-True HD, DTS-HD
Optical Audio Format: PCM2, Dolby 5.1, DTS 5.1
L/R Audio Format: LPCM2
Code HDMIAE £59.99
Audio Only Source to HDMI
Bridge
The AU-11HB Audio Source to HDMI Bridge is designed
integrate audio only sources into HDMI video distribution
systems. It will accept digital (optical) or analogue (L/R
Stereo) audio signals and output them over HDMI. This
clever device also adds a 'blue-screen' video feed into the
HDMI signal path so that any HDMI AV receiver or display
will accept the audio signal for sound reproduction. It
allows audio from any source to be easily integrated into a
HDMI system, very useful when distributing via an HDMI or
HDBaseT matrix, great for systems such as SONOS etc.
Code AU11HB £164.64
HDMI Scaler Audio Cross Convertor
1T-VS-658 Video Scaler is a professional Up and Cross
Convertor with an HDMI output. Fully scaleable video
inputs include HDMI, DVI (via the HDMI connector),
Analog RGB/YPbPr via an HD-15, Analog YPbPr or
480i/576i YUV Component via three RCA, YC and
Composite Video. It handles I/O Resolutions up to
1080p and WUXGA. Both digital and analog audio
processing is supported and audio delays of up to
150ms can be introduced to insure lip sync. Five
Analog Stereo and a SPDIF Coaxial Digital Audio input
can be selected for embedding into the HDMI output.
A separate Coaxial Digital Audio output is also
provided. Advanced features, such as 3D Motion
Adaptive De-Interlacing, 3D Noise Reduction and 8-bit
triple ADC/PLL technology, combine to provide
extremely high quality signal conversion. The HDMI I/O
is HDCP Compliant. An OSD (On Screen Display) menu
makes the 1T-VS-658 easy to set up. Control is via
front panel joystick and buttons, Infrared Remote (via
optional IRC-5) or RS-232 interface.
Features:
HDMI Output Resolutions to WUXGA and 1080p
Inputs: HDMI, RGB, YPbPr, YUV, YC (S-Video), CV
Both Analog and Digital Audio Capable
Audio Delay for Lip Sync Corrections
3D Motion Adaptive De-Interlace & Noise Reduction
3:2 Pull-Down w/2:2 Pull-Down Recovery
Infrared Remote Control (optional IRC-5)
Specifications:
Video Inputs
HDMI (DVI Compatible) 1x via HDMI Connector
Analog RGBHV/YPbPr 1x via HD-15 Connector
Analog YUV Component 1x via 3x RCA Connectors
YC (S-Video) 1x via 4-pin Mini Din
Composite Video 1x via RCA Connector
Audio Inputs:
Digital (S/PDIF) 1x via RCA Connector
Analog Stereo 3x via RCA (R/L)
2x via 3.5mm Mini-Stereo
Video Output:
HDMI v1.2 (RGBHV) 1x via HDMI Connector
Audio Outputs:
Embedded into HDMI Digital per HDMI Spec
Digital (S/PDIF) 1x via RCA Coax Connector
Audio Delay Adjustment Off, 40ms, 110ms, 150ms
Input Video Formats Supported
HDMI v1.2 (RGBHV/YPbPr) Up to WUXGA, 1080p
Analog RGBHV Up to WUXGA@60Hz
Analog YPbPr Up to 1080p
Analog Interlace Component 480i, 576i YUV
DVI (via HDMI Connector) Up to WUXGA, 1080p
Composite and YC (S-Video) NTSC or PAL
Code 1TVS658 £410.11
Audio