Product specifications

14
120 VAC Hot- Pin 4 (Black wire) on the
9-pin connector.
Do not use this pin for 12 VDC
version.
120 VAC Hot
24 VAC Hot- Pin 5 (Black wire) on the 9-
pin connector.
Do not use this pin for 12 VDC
version.
24 VAC hot.
120 VAC or 24 VAC Neutral- Pin 6
(White wire) on the 9-pin connector.
Do not use this pin for 12 VDC
version.
120 VAC or 24 VAC Neutral
Alarm- Pin 13 (White/Orange wire) on
the 18-pin connector.
Normally high, pulled low for 100
msec to show abnormal event. (0-
5V DC operation).
Normally high, pulled low for 100
msec to show abnormal event. (0-5V
DC Operation).
Escrow- Pin 14 (White/Blue wire) on the
18-pin connector.
Input used to control the Escrow
function (0-5V DC operation).
Input used to control the Escrow
function (0-5V Operation).
Inhibit- Pin 12 (Violet wire) on the 18-pin
connector.
Input used to Enable (low) or
disable (high) the acceptor (0-
5VDC operation).
Input used to Enable (low) or disable
(high) the acceptor. (0-5VDC
operation)
Credit/Vend Line 1 ($1)- Pin 1 (Brown
wire) on the 18-pin connector.
Open-collector, normally high
output. Pulled low for 100 msec
when this bill is recognized.
Open-collector, normally high output.
Pulled low for 100 msec when this bill
is recognized.
Credit/Vend Line 2 ($5)- Pin 2 (Orange
wire) on the 18-pin connector.
Open-collector, normally high
output. Pulled low for 100 msec
when this bill is recognized.
Open-collector, normally high output.
Pulled low for 100 msec when this bill
is recognized.
Credit/Vend Line 3 ($10)- Pin 10 (Tan
wire) on the 18-pin connector.
Open-collector, normally high
output. Pulled low for 100 msec
when this bill is recognized.
Open-collector, normally high output.
Pulled low for 100 msec when this bill
is recognized.
Credit/Vend Line 4 ($20)- Pin 5 (Green
wire) on the 18-pin connector.
Open-collector, normally high
output. Pulled low for 100 msec
when this bill is recognized.
Open-collector, normally high output.
Pulled low for 100 msec when this bill
is recognized.
Configuration Card
The Configuration Card is to be copied from
this manual using either a laser or a bubble jet
copier. Use standard photocopy paper. After
copying it, make sure that it matches the
original size of 6.0 x 2.6 inches (152 x 66
mm).
Note: Copiers occasionally change the size of
printed materials. This is why you should
compare the copied card to the original card.
To use your copy, fill in the desired selections
with black felt-tipped ink and cut the
Configuration Card out along the solid line. If
you are printing this manual from a PDF file
(which may be downloaded from our web site),
you must turn off any “shrink” or “expand”
settings from within the print menu to be
sure the card is printed at the proper scale.