TM Installation Instructions Manual 3 - AC Receiver PY-ACW Use this manual in conjunction with : • Manual 1 : Operating Instructions • Manual 2 : Network Wiring The manuals supplied with the separate items in your system Please read this manual completely before installing your AC receiver
Product Safety Please follow these instructions as you install your pyramid module and keep them for future use. If you have any problems contact your Baxall agent. WARNING: Installation is only to be carried out by competent, qualified and experienced personnel WARNING: Wire in accordance with your national wiring regulations.
Electromagnetic Compatibility (EMC) CAUTION : This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. CAUTION : If you are using the PCB version of this product in any way other than correctly installed in our Pyramid System weatherproof boxes, then it is your responsibility to meet EMC requirements.
Unpacking Keep your packaging for use if your AC receiver is stored for a time or needs to be returned for whatever reason. The packaging should contain:• Your PY-ACW, AC receiver with PS1 or PS5 (24V AC) • An A4 Module Description sheet (for installation details) • These Instructions • Two identical bar-codes Check the product code on the serial number label. If you have an incorrect item or it is damaged then inform the suppliers and carriers immediately.
We recommend that during a system installation you store the module description sheets in a ring-bound file, and keep them for reference after the installation is complete. Figure 1.
Connections Below is a description of each of the connectors. The connections are described in numeric order, followed by video, network and power connections. CON1 CON1 is for the PCB power connection. This power controls the switching of the relays, the video gain and lift and the lens functions. AC power for the P/T head and auxiliaries is connected separately to CON5. The PCB requires a +12V DC ± 10%, 1A class 2 power supply, this is already connected.
CAUTION : Your application must not draw more than 1A per relay or it will damage your AC receiver CAUTION : Connect lamps using a separate relay because they draw an initial surge current which may damage your AC receiver Referring to CON4 on figure 1 connect LEFT, RIGHT, UP and DOWN to your P/T head and AUX A to wash, AUX B to wipe, AUX C to lamps and AUX D to camera power. Do not connect any unused auxiliaries. Connect all the return (neutral) wires to the spare terminals on the external terminal block.
Referring to figure 1, connect the video from your camera to VIDEO IN, through your AC receiver, then from VIDEO OUT to the matrix. NETWORK CAUTION : To avoid damaging your module switch off the power before fitting the network card Switch off the power, fit a network card in the position indicated on figure 1. Connect the cable provided from the network card to the filter board mounted on the metal base plate. Connect the network to the filter card.
Testing Your AC receiver has an on board test procedure which steps through outputs in the sequence shown in Table 1. The test push button is shown in figure 1. The test takes 55 seconds. Running the test procedure also allows your receiver to detect the feedback polarities for your P/T head and lens. WARNING : Your AC receiver PCB now contains live voltages Using an appropriate tool, press the test push button. Table 1.
Specifications Features Bar coding for ease of installation Automatic configure and remote setup Anti-tamper switch detects opening of lid, also external connection provided. All connections removable (except CON5, LIVE and NEUTRAL) screw terminal blocks 128 Presets, all functions.
IP65 case Board size 130 x 160 x 40mm (excluding mounting pillars) Box Size 280 x280 x130mm Temperature Specification Operational temperature limits:-10ºC to +50ºC at 10% to 80% relative humidity (non-condensing) Storage temperature limits:-20ºC to +60ºCat 10% to 95% relative humidity (non-condensing) Page 11
%D[DOO 6HFXULW\ /LPLWHG Stockport, England Baxall Security Ltd. Reserve the right to make changes to the product and specification of the product without prior notice to the customer.
