Manual 4 Pyramid DC Receiver Installation Instructions Please read this manual before installing your receiver
Pyramid DC Receiver Installation and Operating Instructions Use this manual in conjunction with Manual 1 - Operating Instructions Manual 2 - Network Wiring The manuals supplied with the separate items in your system IMPORTANT The first few pages of these instructions contain important information on safety and product conformity. Please read, and ensure that you understand this information before continuing.
Installation and Operating Instructions Pyramid DC Receiver CONTENTS Product Safety ........................................................................................................................................................................................... 4 Product Reliability .....................................................................................................................................................................................
Pyramid DC Receiver Installation and Operating Instructions PRODUCT SAFETY Please follow these instructions as you install your pyramid module and keep them for future use. If you have any problems contact your Baxall agent. WARNING Installation is only to be carried out by competent, qualified and experienced personnel. Wire in accordance with your national wiring regulations. Failure to do so can result in injury or death by electric shock. Use a class 2 isolated power supply for the 12V DC.
Installation and Operating Instructions Pyramid DC Receiver THESE INSTRUCTIONS These instructions allow you to install your Pyramid DC receiver, they do not contain any application information. As the installer you are assumed to have a sound knowledge of how receivers operate, if you have not then contact a CCTV installation company for advice.
Pyramid DC Receiver Installation and Operating Instructions CONNECTIONS Below is a description of each of the connectors. The connections are described in numeric order, followed by video, network and power connections. CON1 CON1 is for the 24V DC power connection. Your DC receiver requires a +24V DC, 65W class 2 power supply, this is already connected. If the polarity is correct when the power is switched on, LED1 (see figure 1) will illuminate green.
Installation and Operating Instructions Pyramid DC Receiver CONNECTIONS NETWORK Network cards come pre-fitted to your Pyramid DC Receiver and in normal circumstances there will be no need to disconect the network card. If you need to remove or refit a network card, proceed as follows. CAUTION To avoid damaging your module switch off the power before fitting the network card Switch off the power, fit a network card in the position indicated on figure 1.
Pyramid DC Receiver Installation and Operating Instructions REPLACING THE LID WARNING Refit the lid securely to prevent unauthorised access Tighten the four securing screws with an appropriate tool until they cannot be undone by hand. Do not exceed a torque of 4 Nm. MAINTENANCE Once your DC receiver is correctly installed and commissioned it requires no further maintenance.
Installation and Operating Instructions Pyramid DC Receiver SPECIFICATIONS Features Bar coding for ease of installation Automatic configure and remote setup Anti Tamper switch detects opening of lid, also external connection provided. 128 Presets, all functions. Preset resolution, 10-bit Random Pan / Patrol / Electronic end stops Test button Pan and Tilt Drives Speed Control using Pulse Width Modulation (PWM) of 24V DC 4, 6, 7 and 8-wire configuration using a link on the PCB Max drive 1A per motor, 0.
Baxall Limited, Stockport, England. Visit our Web site: http://www.baxall.com Baxall Limited reserve the right to make changes to the product and specification of the product without prior notice to the customer.
