Specifications

Home Theater
Section 3
3
71
Order Toll Free
1-800-543-4330,
FAX
1-800-765-6960
71
Order Toll Free
1-800-543-4330
Fax
1-800-765-6960
NET 30
Terms
Remote Extender
with In–Wall Target
Complete infrared
extender system includes
a compact IRBug emitter,
power supply, and plasma
proof in–wall mounted IR
target. Add additional
targets to control device
from multiple locations.
Wall mount targets
occupy standard single
gang space, and are intended for use with
conventional Decora style cover plates. White color.
Order # Description (1–3) (4–up)
50-6860 Complete system $99.95 $87.50
50-6861 Additional target 84.95 74.42
High Output
Infrared Emitter
Compatible with the
output of most infrared
repeaters, this device emits
higher signal output for nearly
three times the distance
coverage. Additionally, with this units wide radiation
angle, this unit will be “seen” by devices over a
much larger area. Base is
1
⁄2" diameter and includes
adhesive pads for easy mounting.
Order # (1-3) (4-up)
50-6465 $6.50 $5.72
“Plasma–Proof” Infrared Remote Control Extender Systems
Infrared extenders allow IR controlled items to be operated over large areas, or from different rooms. Package consists of an
IR sensor/processor and emitter, which is placed near the device to be controlled. These two components may be connected
with any type of wire, including single pair telco, zip cord or speaker wire. Use of narrow band technology, and proprietary
manufacturing techniques, renders these units virtually interference-proof, with greatly increased range. This allows these
units to reliably operate in direct sunlight, and in close proximity to problematic plasma display monitors. Additional IR
sensor/processors may be added, allowing operation from more than one area. Additional emitters may also be added,
to allow control of multiple components.
IR Remote
Extender with
MicroMount
Target
Complete infrared
extender system
includes a compact IRBug emitter, power supply,
and plasma proof IR target. The extremely compact
target is housed in a
5
⁄8" diameter threaded housing,
and includes status and talkback LEDs. It is perfect
four mounting in speaker baffles, behind grill cloths,
in wall plates and panels. White opaque cap allows
infrared signal to pass, yet makes the target
invisible when mounted on a white surface.
Order # Description (1–3) (4–up)
50-6875 Complete system $157.00 $138.02
50-6876 Additional target 109.00 92.75
Shelf Top
Remote
Extender
Complete
infrared
extender
system includes a compact IRBug emitter, power
supply, and plasma proof IR target. The target is
mounted in its own separate enclosure, allowing
easy placement on shelves or on top of sets. A front
panel bi–color LED indicates system status and
indicates the reception of a command from the
IR remote.
Order # Description (1–3) (4–up)
50-6870 Complete system $157.00 $136.99
50-6871 Additional target 124.00 109.18
Remote
Extender with
Ceiling
Mounted
Target
Complete
infrared
extender system includes a compact IRBug emitter,
power supply, and plasma proof ceiling mount IR
target. Unique target is designed for low profile
insertion into a 1" diameter hole in drywall or most
other surfaces. Ceiling mounting allows excellent
360° access. Add additional targets to control device
from multiple locations. White color.
Order # Description (1–3) (4–up)
50-6865 Complete system $94.95 $83.17
50-6866 Additional target 79.95 69.99
IR Remote
Extender with
Stealth™
Target
Complete
infrared
extender system
includes a compact IRBug emitter, power supply, and
plasma proof IR target. By separating the infrared
detector, and electronic circuitry into two separate
components, the size of the visible component is
reduced to virtually invisible. This is ideal for use
in difficult, appearance critical situations.
Order # Description (1–3) (4–up)
50-6880 Complete system $114.00 $100.68
50-6881 Additional target 99.95 87.50
Egor Tabs™
Adhesive Tabs
Specifically
designed
adhesive tabs
for attaching
IR emitters to
the front of
electronic
equipment. Greatly reduces future service calls
due to emitters falling off of equipment. Features:
•High strength tabs provide greater hold ability than
cyanoacrylate glues such as Super Glue™ •Fast, easy
peel-and-stick application •Transparent to the
infrared spectrum •100% hidden from view once
applied •Easily removable without residue
•Dimensions: 19mm x 6mm •Sold in packages of ten
Order # (pkg.)
50-8380 $4.99
A/B Input Source
Switch Box
Compact control box allows
selection of two input
sources into a single
auxiliary or tape input.
Single push button switch
selects source “A” or “B”.
Ideal when connecting
audio devices such as CD
players, VCRs, laser disk
players and satellite
receivers to home stereo
equipment. Output
connection is made via
attached 5' lead, terminated
with male RCA type
connectors, color coded red
and white. Input connections
are RCA type female. Rugged
metal enclosure is black in color, dimensions: 3" (W)
x 1" (H) x 3" (D) including switch and connections.
Order # (1-5) (6-9) (10-up)
50-6220 $6.99 $6.58 $5.96
Input Source Mixer/
Headphone Amplifier
Versatile table-top device
features two stereo line
level inputs and a single
line level output, allowing
the user to mix two sources
into one. Slide controls allow independent gain
adjustment for each source. Front panel 3.5mm
stereo headphone jack, with slide level control, is
provided for monitoring of the mixed source.
Compact unit is perfect for any application requiring
a low cost line mixer, or headphone amplifier. Metal
case has non-skid rubber feet and stays securely in
place. All connections, except headphone, are RCA
type female. Requires 12VDC, 100mA. AC adaptor
included. Dimensions: 1
3
⁄4" (H) x 5" (W) x 4
1
⁄2" (D).
Black color.
Order # (1-4) (5-9) (10-up)
50-6182 $26.89 $24.74 $21.85
Phono Input Attenuator
Device allows standard line level items to be played through magnetic phono inputs,
commonly found on older home audio receivers and mixing consoles. CD/DVD/ MP3
players, tape decks, VCRs, computer sound cards and tuners may now be connected to
unused phono inputs. In addition to providing the required signal attenuation, this
unit provides passive equalization to compensate for the RIAA curve that is present on
magnetic phono inputs. Inputs are RCA female, outputs are male RCA connections on
a 7" pigtail. Passive device requires no power. Dimensions: 1" (H) x 2.25" (W) x 3" (D)
Order # (1–3) (4–11) (12-up)
50-7240 $9.99 $8.64 $7.82
C51 pg 071 7/28/06 10:27 AM Page 71