Specifications

Home Theater
Section 3
72
Order Online
www.mcminone.com
NET 30
Terms
3
BACK
Six-Way Video Selector
Tabletop video switcher provides independent
selection of up to six A/V sources, routing them to
two different destinations. Select from inputs such
as a satellite receiver, digital cable box, DVD player,
DVR, VCR or video game. Dual outputs, with
independent selectors, allow easy recording of one
source, while viewing another, or viewing of two
different sources on separate monitors. Inputs and
outputs are standard line level L/R audio, composite
video, and S-video. S-video connections are standard
four-pin DIN female, all others are RCA type
female. Rugged metal enclosure measures 1
3
⁄4" (H) x
11
1
⁄2" (W) x 5
1
⁄4" (D), including non-skid rubber feet.
Note: Either composite or S-video inputs may be
utilized, but not both. This selector will not convert
from one video format to the other. Passive device
requires no power.
Order # (1-3) (4-up)
50-7780 $37.89 $35.12
S-Video Distribution Amplifier/Selector
Tabletop distribution amplifier allows selection
between two A/V inputs and provides six outputs.
Separate paths are provided for composite video and
S-video sources, allowing compatibility with standard
and high quality S-video equipment. Independent left
and right audio signal paths allow compatibility with
stereo sources. Front panel pushbutton manually
selects AV1 or AV2 input source, or select automatic
mode, which sets AV2 as the default input,
automatically switching to AV1 when a signal is
present (switching based on the presence of audio
signal). An internal amplifier maintains signal
quality when distributed to all six outputs. Gain at
each output is 2dB over input signal level. Front panel
1
⁄4" stereo headphone jack, with level control, allows
convenient monitoring of the audio source. Rugged
metal enclosure measures 1
3
⁄4" (H) x 11
1
⁄2" (W) x 5
1
⁄4"
(D), including non-skid rubber feet. Color-coded audio
and video input/output connections are RCA type
female, S-video input and output connections
are standard four-pin DIN female type. Note: Either
composite or S-video inputs may be utilized, but
not both. This selector will not convert from one
video format to the other. Requires 12VDC,
AC adaptor included.
Order # (1-3) (4-up)
50-7775 $59.95 $55.57
BACK
Phono Preamp with Input Selector
This pre–amplifier allows a turntable to be played
through conventional line level inputs such as aux,
tape, tuner or CD. It is also useful for operating a
turntable with a computer sound card, mixing
console, or other professional equipment. In addition
to providing the required gain, it adds necessary RIAA
equalization to compensate for the industry standard
EQ curve utilized on LPs. Front panel phono/aux
input selector allows an additional line level source to
be connected. Unit features L/R RCA female type
inputs and outputs, plus a separate ground lug
•Power requirements: 12VDC, AC adaptor included
•Dimensions: 1
3
⁄8" (H) x 5
5
⁄8" (W) x 3" (D)
Order # (1–3) (4–up)
50-7770 $24.95 $23.18
Back
Front
Phono
Preamplifier/USB
Interface
This high quality
USB audio interface
with standalone RIAA
phono preamp acts as
an interface between
your computer and
a wide variety of
analog and digital
sources. Analog
inputs are switchable
between phono and line level signals and a low cut
filter removes rumble and wind noise while leaving
the audio pristine. The front panel USB monitor/
headphone
1
⁄8" jack and the optical output on the rear
panel can monitor audio output from your computer.
Line output jacks are always connected to the input
preamps signal for source monitoring. The unit may
be powered by an external power source or from USB
port. Optical TOSLINK in/outs and S/PDIF input let
you use this as a digital audio to USB interface as
well. Fully compliant with the USB 1.1 specification
and uses USB adaptive mode for playback and USB
asynchronous mode for record. It will work with
the USB audio device drivers built into Windows
98SE/ME/2000/XP or Macs with native USB support
OS9.1 or greater or OSX. No special drivers required.
Specifications: •Frequency response: 10Hz~50KHz
•THD: .01% dB •A/D & D/A: 16 bit, 44.1KHz or
48KHz USB selectable •Power requirements:
7~12VDC or 9~12VAC, 150mA, or USB bus
•Dimensions: 1.75" (H) x 4.2" (W) x 3.5" (D)
Order # (ea.)
555-2717 $89.00
Front
Back
DJPRE-II
Phono
Preamplifier
Since newer
receivers typically
do not include
magnetic phono
connection, this pre–amplifier is
required to connect a turntable to a
conventional line level input. It is also necessary if
playing LPs through a computer sound card, mixing
console, or other professional equipment. In addition
to providing the required gain, this unit also adds
necessary RIAA equalization to compensate for the
industry standard EQ curve utilized on LPs.
Features: •L/R RCA inputs and outputs
•Adjustable ±10dB gain •Selectable 100pF/200pF
input capacitance •Switchable 3dB low cut at 22Hz
•Signal clip indicator •Turntable ground lug •Power
requirements: 7~12VDC or 9~12VAC •AC adaptor
included •Dimensions: 1.75" (H) x 4.2" (W) x 3.5" (D)
Order # (ea.)
555-2716 $45.00
Stereo Phono Preamp
•Allows use of turntables
with magnetic cartridges,
with computers sound
card input •Boosts low
level turntable signal
to line level •RCA type
female input and output
connections •Great
when transferring LPs to
digital media •Frequency
response: 30Hz~20KHz •Input level: 6mV •Output
level: 500mV •SN ratio: >60dB •Requires 117VAC,
60Hz •Separately available cable (#24-6270)
converts output connection to 3.5mm male
plug for connection to computer sound card
Order # Description (1-9) (10-up)
40-630 Stereo phono preamp $16.49 $15.39
24-6270 3.5mm male to (2) RCA male cable 5.89 -
DTI Dual Channel
Ground Loop Isolator
The DTI™ is a high
quality, passive solution to
ground loop hum. Dual, high quality
isolation transformers provide ground path
isolation between components, while maintaining
full frequency response. Features: •Virtually
indestructible, extruded aluminum enclosure •
1
⁄4"
TRS, XLR and RCA input and output connection
pairs, supporting balanced or unbalanced lines •Two
independent channels for correcting two ground loops,
or for processing a stereo signal Specifications:
•Frequency response: 10Hz~50KHz, ±0.5dB @ +4dBu
•THD: 0.01% typical @ 1KHz, +18dBu •Insertion loss:
0.4dB @ 100Kohm load, 5.5dB @ 600ohm load
•Dimensions: 1.75" (H) x 4.2" (W) x 3.5" (D)
•Passive device, requires no power
Order # Model (ea.)
555-7685 DTI $45.00
CleanBOX II Ground
Loop Isolator
Ground loop
problems
commonly occur
when multiple
audio components are
interconnected, with
differing ground sources.
Normally, this problem
manifests itself as 60Hz hum
(or some higher harmonic) in the audio system. The
CleanBOX II is a passive device, which features
two independent channels, with transformer
isolation between the inputs and outputs, for
virtually no signal degradation. In/output
connections are
1
⁄4" TRS, and will accept balanced
or unbalanced signals. Specifications: •Frequency
response: 10Hz~50KHz •THD: 0.01% typical
•Insertion loss: 4dB (100Kohm load) •Dimensions:
2.9" (H) x 4.5" (W) x 1.5" (D)
Order # (ea.)
555-2707 $34.95
C51 pg 072 7/28/06 10:28 AM Page 72