Specifications

All-In-One Music
Distribution System
The MDS-6A all-in-one music
distribution system can accept
up to six different music sources. It offers 480W of system
power, 40W per channel, with up to 12 channels available.
Volume level adjustments are provided to customize the
level of each of these features. Music control is provided via either the MCS-1A or MCS-2A keypads. Each provides
you with flexible control over the MDS-6A and connected music sources and gives the user feedback on the status
of the system. The MCS-1A is a single gang Decora™ style controller with volume, mute, and source selection
buttons. An IR target is provided that allows complete control of the connected music source. Learning remotes
can be configured to duplicate the MCS-1A’s volume, source and mute control. For complete system control, use
the MCS-2A double gang control. A full learning keypad with onboard universal code library, the MCS-2A will
learn IR codes from each of the six sources including track selection, play, start, stop and other key functions. In
addition, the keypad can learn up to 25 macros with ten
steps each. Macro codes are permanently stored and can
be cloned between additional MCS-2A controllers.
Home Theater
3
79
Order Toll Free
1-800-543-4330,
FAX
1-800-765-6960
79
Order Toll Free
1-800-543-4330
Fax
1-800-765-6960
NET 30
Terms
Amp Five Series
Monoblock Amplifiers
Multichannel power amplifiers have
become the foundation upon which the
best home sound systems are built.
With the proliferation of multizone
sound reinforcement and state of the
art digital surround sound, the
amplification of several channels has
evolved from a luxury into a necessity.
The AudioSource Amp Five Series are
fully featured, high current monoblock
power amplifiers. High quality, fan
cooled discreet output devices stay cool
under the most demanding situations.
Large toroidal power supplies and
oversized capacitors work together
to ensure an abundance of headroom
while staying stable into loads as low as
two ohms. The Amp Five Series is completely
modular within its optional rack mountable
chassis. This chassis accommodates six 100W,
four 150W or three 250W modules. Many other
combinations may be utilized. For example, a
typical Dolby Digital home theater system,
three 100W and two 150W modules may be
utilized within the chassis. Optional blank
face plates are available for a clean front panel.
Other features: •2ohm stability •Front panel
status LEDs •Gain control •Heavy–duty,
gold–plated five–way binding posts •Switchable 100Hz, 12dB “low cut” filter •0/180° phase switch •Balanced XLR
input •Unbalanced RCA line input •Loop–through line out Specifications: •THD <0.1% •Frequency response:
20Hz~20KHz •S/N ratio: 95dB •Input sensitivity: 1.0V •XLR input impedance: 20Kohm •Line input impedance:
10Kohm •Damping factor: 200 •Dimensions: 5.5" (H) x see chart (W) x 11.75" (D)
Order # Model # RMS Output @4ohm Width (ea.)
50-6400 AMP5.1 100W 2.75" $134.00
50-6402 AMP5.3 250W 5.5" 224.00
Amp Five Series Accessories
Order # Description (ea.)
50-6410 Rack mount chassis, 16.5" internal width $59.95
50-6411 2.75" blank faceplate 12.50
50-6412 4.125" blank faceplate 12.50
50-6413 5.5" blank faceplate 12.50
#50-6402
#50-6400
#50-6410
AMP100 Stereo Power Amplifier
Perfect for high fidelity situations needing an
independent audio amplifier. Use as part of a
multi–amp configuration in home theater systems, a
zone amplifier in distributed sound applications, or as
a monitor amp in the studio. This solid no–nonsense
amplifier provides 50W RMS per channel, at 8ohm,
with less than 0.04% THD, and may be bridged for
100W RMS mono. Additional features include A/B
speaker outputs, with front panel control, individual
L/R level controls, and heavy duty five–way
binding post outputs. Dimensions: 2.75" (H) x
16.5" (W) x 8" (D).
Order # (ea.)
50-6062 $114.00
Back
Front
AMP Series Stereo Power Amplifiers
These new AMP200/300 from AudioSource were designed from the ground–up, with the distributed audio
installer in mind. Additionally, their solid performance makes them ideal components in high–end audio
systems. Features: •Front panel controls for level, balance and A/B speaker selection •Two sets of input pairs,
each accept line or speaker level signal •Auto–switching between inputs, with adjustable delay •Line level pass
through output on input #2 •Rear mounted master level controls (allows gain limiting) •Manual or auto–sensing
power control •12V trigger input allows power–on command from external components •12V trigger output allows
amplifier to trigger external components •Stereo and bridged mono operation •Heavy–duty binding
post speaker outputs •2ohm stability •Discrete output components •THD of less than 0.05% (at 8ohm)
Order Model Output (4ohm) Output (8ohm)Bridged Dimensions (ea.)
50-7570 AMP200 125W RMS x 2CH 200W RMS 3
1
⁄2" (H) x 16
1
⁄2" (W) x 14" (D) $349.00
50-7575 AMP300 235W RMS x 2CH 375W RMS 5
1
⁄4" (H) x 16
1
⁄2" (W) x 14" (D) 449.00
#50-7570
#50-7575
EQ 200 Stereo Graphic Equalizer
Provides equalization of the entire spectrum, with ten
bands per channel, one octave apart. Left and right
input level controls allow perfect matching. Multi
colored spectrum display shows relative level of each
band. Each of the 20 slide controls allows easy visual
identification of settings. Rear panel has connections
for audio and video inputs and outputs, two sets of
tape inputs and outputs. Front panel controls
include EQ bypass switch, EQ record and
tape monitor selection.
Order # (ea.)
50-6090 $125.00
Stereo Pre-Amplifier
This elegantly simple pre-amp offers audiophile
performance, without the extravagant price. Perfectly
matched in appearance and performance to the
AudioSource AMP Two and AMP Three, this control
unit is compatible with any amplifier accepting line
level inputs. This unit provides selection of inputs
labeled DVD, CD, LD, Tuner, Tape and Aux. (magnetic
phono requires optional pre-amp, such as MCM
#40-630). Additionally, there are two sets of line
outputs and one tape loop. Rotary controls
independently adjust volume, balance,
bass and treble.
Order # (ea.)
50-6065 $175.00
Section 3
C
A
B
Fig. Order# Description (1-4)
A MCS-1A Single gang keypad controller $100.00
B MCS-2A Dual gang keypad controller 180.00
C MDS-6A 6 X 6 audio distribution amplifer 1330.00
C51 pg 079 7/28/06 10:39 AM Page 79