Specifications

Home Theater
Section 3
3
63
Order Toll Free
1-800-543-4330,
FAX
1-800-765-6960
63
Order Toll Free
1-800-543-4330
Fax
1-800-765-6960
NET 30
Terms
MA Series Ceiling Speaker
Completely enclosed ceiling speaker is the ideal all–purpose solution, covering a
wide variety of distributed commercial and residential sound applications. Internal
25V/70V transformer taps are easily selected via the front baffle, allowing final
volume balancing to be done after installation. 8ohm position is provided for
residential applications. Rear back box provides protection to the speaker plus
consistent sound, regardless of location. Polypropylene cone woofers and ported
enclosures provide extended frequency response typical of much higher cost units.
Features: •Rubber surround woofers •1" mylar dome tweeter •Fire retardant ABS
rear enclosure •White ABS frame with rotating mounting clips •Easily installs to
existing wallboard •Transformer taps: 0.25W, 0.5W, 1W, 2.5W, 5W, 7.5W, 15W, 30W,
40W (#50-7536 only) •Sold individually
Woofer Power Capacity Frequency SPL Overall Frame Cutout
Order # Size RMS/Peak Response (W/M) Diameter Hole (1–3) (4–11) (12–up)
50-7535 5
1
⁄4" 30W/60W 57Hz~20KHz 87dB 9.9" 8.2" $45.95 $39.95 $36.75
50-7536 6
1
⁄2" 40W/80W 34Hz~20KHz 88dB 11.42" 9.74" 54.95 46.95 43.75
Enclosed Two–Way Ceiling Speaker Pairs
Easy to install ceiling speakers are ideal for background
music, paging, home theater or any general music
application. High quality full range system consists of a
poly cone woofer, with rubber surround, and a
1
⁄2" mylar
dome tweeter. The addition of a molded PVC back–box
ensures uniform sound quality regardless of mounting
location, while protecting the speaker from insulation
debris and temperature extremes. Rotating mounting clips
allow fast installation in to ceiling tile and drywall with no
additional hardware. Each speaker is 8ohm. Sold in pairs.
Woofer Power Capacity Frequency SPL Overall Frame Cutout Mounting Price Per Pair
Order # Size RMS/Peak Response (W/M) Diameter Hole Depth (1–3) (4–11) (12–up)
50-6545 6
1
⁄2" 35W/100W 65Hz~20KHz 90dB 9
1
⁄2"8
1
⁄16"5
1
⁄2" $73.00 $69.00 $66.00
50-6546 8" 35W/100W 50Hz~20KHz 92dM 11" 9
5
⁄8"7" 87.50 78.50 70.00
Enclosed Two–Way In–Wall Speaker Pairs
Easy to install in–wall speakers are ideal for background music, paging, home
theater or any general music application. Their wide frequency response and above
average power capacity make them ideal as main, surround or background speakers.
System consists of a woven fiberglass, blue cone woofer, with rubber surround, and
a 1" titanium swivel dome tweeter. The addition of a molded PVC back–box ensures
uniform sound quality regardless of mounting location, while protecting the speaker
from insulation debris and temperature extremes. Rotating mounting clips allow
fast installation in to drywall with no additional hardware. All will mount in a
standard 2 x 4 studded wall. Each speaker is 8ohm. Sold in pairs.
Woofer Power Capacity Frequency SPL Overall Frame Price Per Pair
Order # Size RMS/Peak Response (W/M) Dimensions (1–3) (4–11) (12–up)
50-6547 5
1
⁄
4" 40W/80W 55Hz~20KHz 88dB 11.75" (H) x 8.3" (W) x 3.6" (D) $96.50 $87.00 $77.00
50-6548 6
1
⁄2" 60W/100W 50Hz~20KHz 88dB 12.0" (H) x 8.6" (W) x 4.25" (D) 116.95 105.50 93.95
50-6549 8" 80W/120W 50Hz~20KHz 88dB 14.0" (H) x 10.0" (W) x 4.1" (D) 140.49 126.39 112.39
Infatuation™ Series Ceiling Speaker Pairs
Components utilized in this ceiling speaker series were
designed specifically for use in this application, with sonic characteristics perfectly
matched to each other. The high frequency roll-off of the woofer is exceptionally
smooth and well defined. The silk dome tweeter also provides consistently smooth
response, beyond 20KHz. Because of this, a single, foil crossover capacitor is the
only additional component required. This results in much truer sound, eliminates
phase issues created by common 6dB crossovers, and greatly increases efficiency.
Specifically designed for new construction, or retrofits, the white ABS frame
includes rotating mounting clips, for easy installation to existing wallboard.
Features: •Polymica woofer •Rubber surround •Silk dome pivoting tweeter
•Attractive micro–perforated white grill •All models 8ohm •Sold in pairs
Woofer Power Capacity Frequency SPL Overall Frame Cutout
Order # Size RMS/Peak Response (W/M) Diameter Hole (1–3 prs.)(4–11 prs.)(12 prs.–up)
50-7530 5
1
⁄4" 65W/130W 50Hz~20KHz 91dB 9.1" 7.4" $125.00 $105.00 $97.00
50-7531 6
1
⁄2" 75W/150W 40Hz~20KHz 92dB 9.9" 8.2" 145.00 124.00 117.00
50-7532 8" 90W/180W 35Hz~20KHz 93dB 11.42" 9.74" 161.00 137.00 128.00
8" In–Wall Subwoofer
The perfect addition to
in–wall and small satellite
speaker systems, this is a
perfect match for the MCM
#50-6368 ultra compact
in–wall speaker pair. The
dual voice coil 8" long throw
woofer features a 13.3 oz.
magnet, ultra–rigid injection
molded polypropylene cone,
and rubber surround, for
outstanding low frequency
response down to 38Hz.
Included crossover allows
simplified connection of
satellite speakers, with a
high pass frequency of
300Hz. White steel grill and
PVC frame blend seamlessly into most walls, and may
be painted to match any decor. Specifications:
•Power capacity: 250W max (both channels combined)
•Frequency response: 38Hz~300Hz (with included
crossover) •Crossover slope: 12dB/octave at 120Hz
•Impedance: 8ohm per channel •Dimensions (overall):
10
1
⁄8" (W) x 14
1
⁄8" (H) •Required cutout: 8
3
⁄4" (W) x 12
3
⁄4"
(H) •Sold individually
Order # (1–3) (4–up)
51-782 $119.95 $113.25
8"
In–Wall
Subwoofer
The perfect addition
to in–wall, ceiling
and small satellite
speaker systems, this
is a perfect match
any installed speaker
system of 6
1
⁄2" or less.
Features: •Dual voice coil 8" long throw woofer
•30 oz. magnet •Ribbed treated paper cone
•Foam surround •Ported front baffle •Dual
channel 12dB/octve low pass crossover •Feed through
connections satellite speakers (full range) •White
steel grill and PVC frame Specifications: •Power
capacity: 125W/250W max (both channels combined)
•Frequency response: 40Hz~500Hz (with included
crossover) •Crossover slope: 12dB/octave •Impedance:
8ohm per channel •Dimensions (overall): 10" (W) x
14
1
⁄8" (H) •Required cutout: 8
3
⁄4" (W) x 12
3
⁄4" (H)
•Mounting depth 3
3
⁄4" •Sold individually
Order # (1–3) (4–up)
50-6369 $59.95 $54.95
In-Wall Speaker
Selector Switches
Allows the user to select between
more than one source on a single pair
of speakers, or more than one speaker
pair on a single source. A/B style utilizes
a two position rocker type switch.
Available in white, ivory or almond, all switches are
mounted to a single gang decora style plate, cover
included. Rear mounted screw terminal strips accept
up to 14AWG wire. Note: Includes a white switch
on white plate, or black switch on ivory and
almond plates.
Order # Switch Type Plate Color (1~3) (4~up)
50-6700 A/B White $37.25 $31.88
50-6701 A/B Ivory 37.25 31.88
50-6702 A/B Almond 37.25 31.88
Seven Pairs with Two Source Switcher
•Speaker selector with independently rocker type switch for seven pairs
of speakers •Two source switches can play either source 1 or source 2
•Built-in impedance protection •Removable connects accept up to 14
gauge wire •Decora style triple gang plate •Separate left and right
ground paths for compatibility with all amps, even bridged •Power
handling: 50W/CH. (RMS) 100W/CH. (program) •Dimensions: 6.33" (W)
x 4.56" (H) x 2.44" (D) •White
Order # (1-9) (10-up)
50-2765 $74.95 $72.05
C51 pg 063 7/28/06 9:51 AM Page 63