Specifications

76
Order Online
www.mcmelectronics.com
NET 30
Terms
3
Home Theater
section
3
Complete SmartPath
IR Repeater System
Take the guess work out
of setting up a typical one
room system with this
complete IR repeater kit,
everything is included in
one convenient package.
System includes: •One
IRC-3.0 shelf top receiver
•One AT-1.0 amplified
terminator unit •One
PS-1.0 power supply
•Four IRE-1.0 IR emitters
Order # Mfr. # (1-3) (4-11)
50-8363 IRC-3.0 KIT $205.00 $194.75
Standard IR Emitters
Compact sensors attach
via included double sided
adhesive, and may be
mounted near equipment
to be controlled. Multiple
configurations are available
to suit a variety of
applications. Dual emitter units allow placement
in front of two pieces of equipment, from only one
plug connection. Units with visible LEDs provide
visible feedback of presence of IR signal. Each
includes an attached 8' lead, terminated with
a two-conductor 3.5mm plug.
Order # Mfr. # Description (1-3) (4-11) (12-up)
50-8356 IRE-1.0 Single emitter $10.30 $9.79 $8.76
50-8357 IRE-2.0 Dual emitter 17.00 16.15 14.45
50-8358 IRE-3.0 Single emitter 10.30 9.79 8.76
w/visible LED
50-8359 IRE-4.0 Dual emitter 17.00 16.15 14.45
w/visible LED
Micro Mini IR Emitter
Extremely compact IR
sensor is only slightly
larger diameter than its
connection cable, and
can be placed inside the actual component, near
the IR sensor. This emitter will “blast” the entire
chassis, ensuring the equipment IR sensor will receive
the signal. It is a great alternative to “untidy” front
panel emitters. Includes 8' lead terminated with
two-conductor 3.5mm plug.
Order # Mfr. # (1-3) (4-11) (12-up)
50-8355 IRE-0.5 $30.00 $28.50 $25.50
High Power IR Blaster
Designed for installation
into equipment rack,
this unit is intended to
provide sufficient output
to control all components.
The unique 3" wand
features two high output
IR emitters “flooding”
the rack with the remote signal. The wand can
be adjusted above or below a rack of components to
suit specific situation. Attached 8' lead is terminated
with a two-conductor 3.5mm plug.
Order # Mfr. # (1-3) (4-11) (12-up)
50-8360 IRE-5.0 $29.50 $28.03 $25.08
SmartPath
Connecting Cables
Use to adapt
components for
use with other
equipment, or to
extend existing
leads. Sets include:
•PTP-1.0: Set of six,
12" 2-conductor cables,
male to male 3.5mm plugs •PTP-8: Set of six,
8' 2-conductor cables, male to male 3.5mm plugs
•PTJ-40: 40' 2-conductor cable, male to female 3.5mm
plugs •QIX-1.0: 15' 4-conductor cable, male
to female 3.5mm plugs •SAC-1.0: Diode protected “Y”
cable, single female to two male 3.5mm plugs, allows
connection of one emitter to two sources •PTS-3:
Set of six, 36" 2-conductor cables, male 3.5mm plug
to stripped leads •STS-4: Set of six, 48" 2-conductor
cables, barrel type power plug to stripped leads.
Order # Mfr. # (1-3 sets) (4-11 sets) (12 sets -up)
50-8372 PTP-1.0 $20.00 $19.00 $17.00
50-8373 PTP-8 30.00 28.50 25.50
50-8374 PTJ-40 48.00 45.60 40.80
50-8375 QIX-1.0 8.50 8.08 7.23
50-8376 SAC-1.0 8.50 8.08 7.23
50-8377 PTS-3 12.00 11.40 10.20
50-8378 STS-4 12.00 11.40 10.20
Octagonal Light
Collector Lens
IR lens is designed to attach to
equipment or remote mounted IR
receivers to improve reliability of
IR reception. Multi-array mirror
system provides 90° reflection
angle, insuring equipment will “see”
the IR emitter. Sold in packages of ten.
Order # Mfr. # (1-3 pkgs.) (4-11 pkgs.) (12 pkgs.-up)
50-8370 ILC-1.0 $18.00 $17.10 $15.30
Emitter Cover
Prevents IR signals
from interfering with
other components. Fits over SmartPath IR emitters
or components IR sensor window. Units measure
1" x 2" and may be trimmed to fit.
Order # Mfr. # (1-3) (4-11) (12-up)
50-8371 IR SHIELD $2.00 $1.90 $1.70
Keystone Mount
3.5mm Connector
This keystone
insert features a
standard 3.5mm
three-conductor
female jack which
may be used in two
or three conductor applications. It is ideal any
time a 3.5mm connector is needed at a wall plate.
Rear mounted IDC connector allows simple, fast
connection to unterminated Cat 5 cable, or any
22~24AWG solid or stranded, UTP or shielded wire.
Maximum voltage: 24VAC/DC, 1A. Applications:
•Remote location of headphone jacks •Remote
microphone connections •Remote input from PC
sound card, MP3 player or iPod™ •IR repeater
connection •Remote triggering of A/V components
•Low voltage DC connection •Sold individually
Order # (1-3) (4-up)
50-7753 $6.99 $5.95
Free Standing Stereo Volume Control
Intended for use when in-wall type controls are
not practical, this control is ideal for use with
free standing remote speaker systems. Features:
•Removable terminal strip for greatly eased
installations •12 step attenuation •Suction
cup feet to hold the unit secure during use
Specifications: •Power capacity: 60W RMS
•Frequency response: 20Hz~20KHz •Dimensions:
Overall depth: 2.19" (H) x 8.5" (W) x 6.5" (D)
•Call for larger quantity pricing
Order # (1-3) (4-11)
50-8275 $92.95 $87.60
Outdoor Volume Controls
Specifically designed for
outdoor applications, these
volumes controls feature
stainless steel hardware
and a PVC enclosure, and
are ideally suited for use
with landscaping “rock”
speaker systems. The
housing attaches to standard
3
⁄4" PVC conduit for simplified watertight installation.
Resistor based design provides improved frequency
response when compared to conventional transformer
based units. Specially selected non-inductive, high
capacity resistors ensure full frequency response,
with less than 0.5dB variance. Features: •Special
push-lock connector for fast connection without
a screwdriver •Fits standard electrical boxes
and low voltage brackets •12 step attenuation
Specifications: •Power capacity: 60W •Frequency
response: 20Hz~20KHz, < ±0.5dB •Overall depth:
2
1
⁄2" •Call for larger quantity pricing
Order # Color (1-3) (4-11)
50-8270 Gray $69.95 $65.95
50-8271 White 69.95 65.95
Three-Way Audio/Video Switch Box
Tabletop control box allows selection of multiple A/V
sources. Ideal when connecting several devices, such
as CCTV cameras, camcorders, VCRs, laser disk
players and satellite receivers to a single video
monitor or VCR. Accommodates video and left and
right audio, all connections are all RCA type female.
Metal case has non-skid rubber feet and stays
securely in place. Dimensions: 6.9" (W) x 2.2" (H) x
3.9" (D). Sloped front, black color.
Order # (1-5) (6-9) (10-up)
50-6195 $18.49 $17.02 $14.27
In–Wall A/B Speaker Switch
Simple pushbutton A/B operation
allows selection of two speaker
pairs from a single amplifier, or
a single pair of speakers to select
between two separate sources.
Ideal when a pair of in–wall or
ceiling speakers is needed for a local
stereo or home theater system, and
whole house audio. Mounts in standard single
gang electrical boxes or low voltage brackets, units
include decora cover plate and all hardware.
Order # Description (1–3 kits) (4–11 kits)
50-8440 White $34.95 $33.20
50-8441 Bone 34.95 33.20
50-8442 Almond 34.95 33.20
50-8443 Black 34.95 33.20
C52_pg_076 8/7/07 2:36 PM Page 76