Specifications

78
Order Online
www.mcmelectronics.com
NET 30
Terms
3
Home Theater
section
3
24 Bit/96K D/A Convertor
This compact unit will accept standard coax or
Toslink SPDIF signal, and convert it to line level
audio. It is perfect when there is a need to send
digital audio signal to an amplifier not having digital
inputs, including home audio receivers, prosound
amplifiers and mixing consoles. It is perfect when
an unused digital output on a piece of home theater
equipment needs to be sent to a separate whole house
audio amplifier. Features: •Two Toslink inputs •Two
coax inputs •Four-position input selector with LED
indication •
1
⁄4" headphone output with adjustable
level •Separate REC and AMP line level L/R RCA
outputs (both fixed level) •LED power indicator
Specifications: •Digital input: 96KHz (standard
SPDIF) •Resolution capability: 24 bit •Amplitude
linearity: 1.06dB •Frequency response: 20Hz~20KHz
•Channel separation: 100dB @ 1KHz •S/N ratio:
103dB •THD: <0.0015% •Digital filter: 82dB
•Headphone output: 700mW, 8~32ohm •Power
requirements: 12VDC, AC adaptor included
•Dimensions: 1
1
⁄2" (H) x 9
3
⁄4" (W) x 4
1
⁄2" (D)
Order # (1-3) (4-up)
50-7774 $99.95 $84.95
Phono Preamp
with Four Position Input Selector
This unit allows a turntable with magnetic cartridge
to be played through conventional line level amplifier
inputs, while providing performance comparable
to that of units at twice the price. Use to connect a
turntable to newer home theater equipment that often
does not include a phono input, to a computer sound
card, mixing console, or other professional equipment.
In addition to providing the required gain, it adds
necessary RIAA equalization to compensate for the
industry standard EQ curve utilized on LPs. The
four-position input selector allows one turntable
and three line level devices to be selected at a single
input. Unit features L/R RCA female type inputs and
outputs, plus a separate ground lug Specifications:
•Frequency response: 20Hz~20KHz •THD: <0.06%
•S/N ratio: 85dB •Input sensitivity: 3.3mV (phono),
300mV (line level) •Phono input impedance:
47Kohm @ 200pF •Crosstalk: 40dB (phono)
•Power requirements: 12VDC, AC adaptor
included •Dimensions: 1
1
⁄2" (H) x 7" (W) x 3
1
⁄4" (D)
Order # (1-3) (4-up)
50-7772 $44.95 $39.95
Phono Preamp with Input Selector
This pre–amplifier allows a turntable to be played
through conventional line level inputs such as aux,
tape, tuner or CD. It is also useful for operating a
turntable with a computer sound card, mixing
console, or other professional equipment. In addition
to providing the required gain, it adds necessary RIAA
equalization to compensate for the industry standard
EQ curve utilized on LPs. Front panel phono/aux
input selector allows an additional line level source
to be connected. Unit features L/R RCA female type
inputs and outputs, plus a separate ground lug
•Power requirements: 12VDC, AC adaptor included
•Dimensions: 1
3
⁄8" (H) x 5
5
⁄8" (W) x 3" (D)
Order # (1–3) (4–up)
50-7770 $26.49 $24.56
Back
Front
Phono
Preamplifier/USB
Interface
This high quality
USB audio interface
with standalone RIAA
phono preamp acts as
an interface between
your computer and
a wide variety of
analog and digital
sources. Analog
inputs are switchable
between phono and line level signals and a low cut
filter removes rumble and wind noise while leaving
the audio pristine. The front panel USB monitor/
headphone
1
⁄8" jack and the optical output on the rear
panel can monitor audio output from your computer.
Line output jacks are always connected to the input
preamps signal for source monitoring. The unit may
be powered by an external power source or from USB
port. Optical TOSLINK in/outs and S/PDIF input let
you use this as a digital audio to USB interface as
well. Fully compliant with the USB 1.1 specification
and uses USB adaptive mode for playback and USB
asynchronous mode for record. It will work with
the USB audio device drivers built into Windows
98SE/ME/2000/XP or Macs with native USB support
OS9.1 or greater or OSX. No special drivers required.
Specifications: •Frequency response: 10Hz~50KHz
•THD: .01% dB •A/D & D/A: 16 bit, 44.1KHz or
48KHz USB selectable •Power requirements:
7~12VDC or 9~12VAC, 150mA, or USB bus
•Dimensions: 1.75" (H) x 4.2" (W) x 3.5" (D)
Order # (ea.)
555-2717 $99.00
Front
Back
DJPRE-II
Phono
Preamplifier
Since newer
receivers typically
do not include
magnetic phono
connection, this pre–amplifier is
required to connect a turntable to a
conventional line level input. It is also necessary if
playing LPs through a computer sound card, mixing
console, or other professional equipment. In addition
to providing the required gain, this unit also adds
necessary RIAA equalization to compensate for the
industry standard EQ curve utilized on LPs.
Features: •L/R RCA inputs and outputs
•Adjustable ±10dB gain •Selectable 100pF/200pF
input capacitance •Switchable 3dB low cut at 22Hz
•Signal clip indicator •Turntable ground lug •Power
requirements: 7~12VDC or 9~12VAC •AC adaptor
included •Dimensions: 1.75" (H) x 4.2" (W) x 3.5" (D)
Order # (ea.)
555-2716 $45.00
Stereo Phono Preamp
•30Hz~20KHz response
•6mV input produces
500mV out •50Kohm
impedance •SN ratio
over 60dB •Uses
standard 117VAC
•For use with amplifers
without a magnetic
phono preamp
Order # (1-9) (10-up)
40-630 $16.95 $15.50
Complete LP to Digital Recording System
This complete package allows you to easily
transfer vinyl to PC for digital conversion and
storage. Included is the highly popular AT-PL50
belt drive turntable from Audio-Technica,
Cakewalk Pyro™ software, the AT-6012 record
care kit, and connecting cables for both conventional
stereo receiver and computer sound card inputs.
The fully automatic turntable features an internal
preamplifier which provides RIAA equalization and
compatibility with standard line level inputs, and may
be switched off for use with magnetic phono inputs.
Other features include: •Soft damped cuing lever
•Included cartridge and stylus •Metal platter
•Included base and dustcover
Order # Description (1-2)
555-2092 Turntable only $99.95
555-2093 Complete kit 159.00
Direct Drive Turntable
Rugged turntable is
ideal for DJ or home
theater applications
where performance
and durability are a
must. High torque,
quartz–locked,
direct–drive motor
provides highly accurate
speed control, with immeasurable subsonic rumble.
Internal preamplifier provides RIAA EQ compensation
for direct connection to line level inputs on home
theater receivers, mixing consoles and computer
sound cards. Features: •All metal “S” shaped tone
arm •Included Audio-Technica cartridge, stylus and
head–shell •Aluminum platter •Pitch control •Quartz
lock design •Anti skate adjustment •Stylus target
light •Slip mat •Forward/reverse button •33/45/78
speeds •Included output cables •Start/stop button
•High-torque braking •Counterweight and height
adjustment •Strobe indicators •Adjustable feet
•Hinged dust cover
Order # (1–2) (3–up)
555-2094 $299.00 $277.07
C52_pg_078 8/7/07 2:36 PM Page 78