Specifications

3
83
Order Toll Free
1-800-543-4330,
FAX
1-800-765-6960
83
Order Toll Free
1-800-543-4330
Fax
1-800-765-6960
NET 30
Terms
Home Theater
section
3
Amp Five Series Monoblock Amplifiers
Multichannel power amplifiers have
become the foundation upon which
the best home sound systems are built.
With the proliferation of multizone sound
reinforcement and state of the art digital
surround sound, the amplification of several
channels has evolved from a luxury into a
necessity. The AudioSource Amp Five Series
are fully featured, high current monoblock
power amplifiers. High quality, fan cooled
discreet output devices stay cool under the
most demanding situations. Large toroidal
power supplies and oversized capacitors
work together to ensure an abundance of
headroom while staying stable into loads
as low as two ohms. The Amp Five Series
is completely modular within its optional
rack mountable chassis. This chassis
accommodates six 100W, four 150W or three
250W modules. Many other combinations may
be utilized. For example, a typical Dolby Digital
home theater system, three 100W and two
150W modules may be utilized within the
chassis. Optional blank face plates are
available for a clean front panel. Other
features: •2ohm stability •Front panel status
LEDs •Gain control •Heavy–duty, gold–plated
five–way binding posts •Switchable 100Hz,
12dB “low cut” filter •0/180° phase switch
•Balanced XLR input •Unbalanced RCA line input •Loop–through line out Specifications: •THD <0.1%
•Frequency response: 20Hz~20KHz •S/N ratio: 95dB •Input sensitivity: 1.0V •XLR input impedance: 20Kohm
•Line input impedance: 10Kohm •Damping factor: 200 •Dimensions: 5.5" (H) x see chart (W) x 11.75" (D)
Order # Model # RMS Output @4ohm Width (ea.)
50-6400 AMP5.1 100W 2.75" $137.00
50-6402 AMP5.3 250W 5.5" 224.00
Amp Five Series Accessories
Order # Description (ea.)
50-6410 Rack mount chassis, 16.5" internal width $59.95
50-6411 2.75" blank faceplate 12.50
50-6412 4.125" blank faceplate 12.50
50-6413 5.5" blank faceplate 12.50
#50-6402
#50-6400
#50-6410
AMP Series Stereo Power Amplifiers
These new AMP200/300 from AudioSource were designed from the ground–up, with the distributed audio
installer in mind. Additionally, their solid performance makes them ideal components in high–end audio
systems. Features: •Front panel controls for level, balance and A/B speaker selection •Two sets of input pairs,
each accept line or speaker level signal •Auto–switching between inputs, with adjustable delay •Line level pass
through output on input #2 •Rear mounted master level controls (allows gain limiting) •Manual or auto–sensing
power control •12V trigger input allows power–on command from external components •12V trigger output allows
amplifier to trigger external components •Stereo and bridged mono operation •Heavy–duty binding post speaker
outputs •2ohm stability •Discrete output components •THD of less than 0.05% (at 8ohm)
Order Model Output (4ohm) Output (8ohm)Bridged Dimensions (ea.)
50-7570 AMP200 125W RMS x 2CH 200W RMS 3
1
⁄2" (H) x 16
1
⁄2" (W) x 14" (D) $399.95
50-7575 AMP300 235W RMS x 2CH 375W RMS 5
1
⁄4" (H) x 16
1
⁄2" (W) x 14" (D) 470.00
#50-7570
#50-7575
AMP100 Stereo Power Amplifier
Perfect for high fidelity situations needing an
independent audio amplifier. Use as part of a
multi–amp configuration in home theater systems, a
zone amplifier in distributed sound applications, or as
a monitor amp in the studio. This solid no–nonsense
amplifier provides 50W RMS per channel, at 8ohm,
with less than 0.04% THD, and may be bridged for
100W RMS mono. Additional features include A/B
speaker outputs, with front panel control, individual
L/R level controls, and heavy duty five–way
binding post outputs. Dimensions: 2.75" (H) x
16.5" (W) x 8" (D).
Order # (ea.)
50-6062 $136.59
Back
AMP One Stereo Power Amplifier
The AMP One provides outstanding performance
and value. With delivery of 80W RMS per channel,
200W RMS bridged mono, the AMP One provides
plenty of power for most home theater applications
with detail and accuracy. Specifications:
•Output power THD < 0.4% •Frequency response
20Hz~20KHz •S/N ratio 110dB •Input sensitivity
0.8V •Input impedance 30Kohm •Dimensions:
16
1
⁄2" (W) x 2
3
⁄8" (H) x 11
5
⁄8" (D)
Order # (ea.)
50-6060 $199.95
Five Disc Carousel
CD Changer
Front loading multi–disc player features a one–bit
twin D/A convertor, random sequential play, and
bright fluorescent display with music calendar.
Other features include: •Coaxial digital output
•8x oversampling •Three beam laser pick-up
•Headphone output with volume control
•Compatibility with Sherwood Digi–Link
remote control system
Order # Mfr. # (ea.)
50-6321 CDC-5090R $185.00
All-In-One Music
Distribution System
The MDS-6A all-in-one
music distribution system
can accept up to six different music sources. It offers
480W of system power, 40W per channel, with up
to 12 channels available. It features a page/doorbell
input jack as well as a music-on-hold output jack
for interconnection of an optional communications
controller. Volume level adjustments are provided to
customize the level of each of these features. Music
control is provided via either the MCS-1A or MCS-2A
keypads. Each provides you with flexible control over
the MDS-6A and connected music sources and gives
the user feedback on the status of the system. The
keypads are back-lit and are supplied with white
and almond bezels. The MCS-1A is a single gang
Decora™ style controller with volume, mute, and
source selection buttons. An IR target is provided
that allows complete control of the connected music
source. Learning remotes can be configured to
duplicate the MCS-1A’s volume, source and mute
control. For complete system control, use the MCS-2A
double gang control. A full learning keypad with
onboard universal code library, the MCS-2A will learn
IR codes from each of the six sources including track
selection, play, start, stop and other key functions.
In addition, the keypad can learn up to 25 macros
with ten steps each. Macro codes are permanently
stored and can be cloned between additional
MCS-2A controllers. Features: •Six source/six zone
configuration •12 channel x 40W per channel power
amplifier •Zone on/off status indicators •Quick and
easy programming •User feedback to all back-lighted
system keypads •Easy to install and maintain
•Six source-specific, routed IR output ports
Fig. Order# Description (1-4)
A MCS-1A Single gang keypad controller $100.00
B MCS-2A Dual gang keypad controller 180.00
C MDS-6A 6 X 6 audio distribution amplifer 1330.00
C
A
B
C52_pg_083 8/7/07 2:45 PM Page 83