Specifications

3
65
Order Toll Free
1-800-543-4330,
FAX
1-800-765-6960
65
Order Toll Free
1-800-543-4330
Fax
1-800-765-6960
NET 30
Terms
Home Theater
section
3
Enclosed Two–Way In–Wall Speaker Pairs
Easy to install in–wall speakers are ideal for background music, paging, home
theater or any general music application. Their wide frequency response and above
average power capacity make them ideal as main, surround or background speakers.
System consists of a woven fiberglass, blue cone woofer, with rubber surround, and
a 1" titanium swivel dome tweeter. The addition of a molded PVC back–box ensures
uniform sound quality regardless of mounting location, while protecting the speaker
from insulation debris and temperature extremes. Rotating mounting clips allow
fast installation in to drywall with no additional hardware. All will mount in a
standard 2 x 4 studded wall. Each speaker is 8ohm. Sold in pairs.
Woofer Power Capacity Frequency SPL Overall Frame Price Per Pair
Order # Size RMS/Peak Response (W/M) Dimensions (1–3) (4–11) (12–up)
50-6547 5
1
⁄4" 40W/80W 55Hz~20KHz 88dB 11.75" (H) x 8.3" (W) x 3.6" (D) $96.50 $87.00 $77.00
50-6548 6
1
⁄2" 60W/100W 50Hz~20KHz 88dB 12.0" (H) x 8.6" (W) x 4.25" (D) 116.95 105.50 93.95
50-6549 8" 80W/120W 50Hz~20KHz 88dB 14.0" (H) x 10.0" (W) x 4.1" (D) 140.49 126.39 112.39
8" In–Wall Subwoofer
The perfect addition to
in–wall and small satellite
speaker systems. The dual
voice coil 8" long throw
woofer features a 13.3 oz.
magnet, ultra–rigid injection
molded polypropylene cone,
and rubber surround, for
outstanding low frequency
response down to 38Hz.
Included crossover allows
simplified connection of
satellite speakers, with a
high pass frequency of
300Hz. White steel grill and
PVC frame blend seamlessly
into most walls, and may be
painted to match any decor.
Specifications: •Power
capacity: 250W max (both
channels combined)
•Frequency response:
38Hz~300Hz (with included
crossover) •Crossover slope:
12dB/octave at 120Hz •Impedance: 8ohm per channel
•Dimensions (overall): 10
1
⁄8" (W) x 14
1
⁄8" (H) •Required
cutout: 8
3
⁄4" (W) x 12
3
⁄4" (H) •Sold individually
Order # (1–3) (4–up)
51-782 $119.95 $113.25
8"
In–Wall
Subwoofer
The perfect addition
to in–wall, ceiling
and small satellite
speaker systems,
this is a perfect
match any installed
speaker system of
6
1
⁄2" or less. Features: •Dual voice coil 8" long throw
woofer •30 oz. magnet •Ribbed treated paper cone
•Foam surround •Ported front baffle •Dual channel
12dB/octve low pass crossover •Feed through
connections satellite speakers (full range) •White
steel grill and PVC frame Specifications: •Power
capacity: 125W/250W max (both channels combined)
•Frequency response: 40Hz~500Hz (with included
crossover) •Crossover slope: 12dB/octave •Impedance:
8ohm per channel •Dimensions (overall): 10" (W) x
14
1
⁄8" (H) •Required cutout: 8
3
⁄4" (W) x 12
3
⁄4" (H)
•Mounting depth 3
3
⁄4" •Sold individually
Order # (1–3) (4–up)
50-6369 $59.95 $54.95
Seven Pairs with Two Source Switcher
•Speaker selector with independently rocker type
switch for seven pairs of speakers •Two source
switches can play either source 1 or source 2
•Built-in impedance protection •Removable
connects accept up to 14 gauge wire •Decora style
triple gang plate •Separate left and right ground
paths for compatibility with all amps, even bridged
•Power handling: 50W/CH. (RMS) 100W/CH.
(program) •Dimensions: 6.33" (W) x 4.56" (H)
x 2.44" (D) •White
Order # (1-9) (10-up)
50-2765 $81.99 $78.79
In-Wall Speaker
Selector Switches
Allows the user to select between
more than one source on a single pair
of speakers, or more than one
speaker pair on a single source. A/B
style utilizes a two position rocker
type switch. Available in white, ivory
or almond, all switches are mounted
to a single gang decora style plate, cover included.
Rear mounted screw terminal strips accept up to
14AWG wire. Note: Includes a white switch on white
plate, or black switch on ivory and almond plates.
Order # Switch Type Plate Color (1~3) (4~up)
50-6700 A/B White $37.25 $31.88
50-6701 A/B Ivory 37.25 31.88
50-6702 A/B Almond 37.25 31.88
Stereo
Volume
Controls
In-wall volume
controls utilize
high quality
multitap audio
transformers
and smooth 12 position rotary switches to provide
full range level control. They are designed for use in
distributed audio systems, primarily those involving
in-wall and ceiling speaker systems. Available in
single gang steel plate and decora style all units
are shipped as white, with ivory plates and knobs
included for easy color conversion. Standard units
are available in 25W RMS and 100W RMS versions,
impedance matching models are 100W RMS.
Impedance matching design allows of up to 16 pairs
of 8ohm speakers to be connected to a single stereo
amplifier, and appear as a 4ohm load. Features:
•Detachable terminal strips accept up to 14AWG
wire •Included matching cover plates with decora
models •May be mounted in a single gang box or
low voltage bracket Specifications: •Frequency
response: 35Hz~20KHz •Attenuation: -34~0dB,
in 12 steps •Impedance matching (applicable
models only): x2, x4 and x 8ohm
Power
Impedance Capacity
Order Style Matching (RMS) (1-3) (4-9) (10-up)
50-7850 Decora No 25W $19.95 $18.50 $17.57
50-7860 Plate No 25W 19.95 18.50 17.57
50-7890 Decora No 100W 22.95 21.28 20.21
50-7880 Decora Yes 100W 25.95 24.06 22.86
50-7870 Plate Yes 100W 25.95 24.06 22.86
Included
Slide Style Stereo
Volume Control
Provides all of the
same benefits of our
other high–quality stereo
in–wall volume controls,
with attractive slide styling.
Impedance matching design
allows use in systems from
one to 16 pairs of speakers
on a single stereo amplifier. Features: •Included
old–work installation bracket, eliminating the need
for an electrical box •Attractive decora styling with
included cover plate •Detachable terminal strips
accept up to 14AWG wire Specifications: •Power
capacity: 100W/180W RMS/max •Frequency response:
35Hz~20KHz •Attenuation: -34~0dB, in 12 steps
•Impedance matching: x1, x2, x4 and x 8ohm •Size:
Standard single gang •Color: White •Call for larger
quantity pricing
Order (1–3) (4–11) (12–up)
50-6377A $29.95 $27.15 $24.68
Audiophile Grade Stereo Volume Control
Transformerless volume controls are ideal for use with
any in-wall or ceiling speaker system, where local control
is desired, and pure sound quality is a must. High–quality,
close tolerance audiophile grade resistors are used instead
of conventional audio transformers, allowing full 20Hz~20KHz frequency response to
pass through to the speaker. This single difference provides performance that is superior to virtually any
transformer based control, at any price. Rotary control provides 0~36dB attenuation in 11 steps, with position
12 being off. All models include white and ivory cover plate and knob to match any décor. Detachable terminal
strips greatly ease installation and will accept up to 14AWG cable. Control mounts in standard single gang
boxes or mud rings, and includes decora style cover plate. Power capacity: 60W RMS per channel.
Order # (1–3) (4–9) (10–up)
50-7905 $29.95 $27.76 $24.67
C52_pg_065 8/7/07 2:53 PM Page 65