Instruction Manual

1. Press the lid release button “PUSH” (2) (fig. 1) and fill the
kettle with cold water (fig. 2).
HINT:SaveEnergy–Donotboilmorewaterthan
youneed.
Attention! Make sure the water level does not
exceedtheMAXindication.
2. Place the kettle on the base (6) (fig. 3).
3. The water will boil and the kettle will switch off automati-
cally (fig.5). The light indicator (8) will turn on.
4. Your kettle will boil and switch off automatically (fig. 5) and the light indicator (8) will turn off
5. Unplug the power cord.
To interrupt the boiling, ensure that the switch is on the “O” (OFF) position before
removingthekettlefromthepowerbase.
Yourkettleisfittedwithafiltertoholdbacklimescaleparticles.
Ifyoufinddropsofwaterunderyourkettle,don’tworry–itisjustcondensation.
Note:Donotleavewaterinthekettleaftereachuse.
USE YOUR KETTLE
light
fig.1 fig.2
fig.3 fig.4
fig.5
USE YOUR KETTLE WITH THE TEA/HERBS ACCESSORY
Followsteps1-4from“useyourkettle”section
1. Fill the tea/herbs filter (5) with the quantity of tea or herbs that you desire. Never use tea or
herbs packed pods, always use unpacked tea or herbs.
2. Place the tea/herbs filter (5) on its position into the kettle and leave it into the kettle accord-
ing to your preference. Always follow the perpetration introductions that the supplier of the
tea/herbs recommends.