Instruction Manual

DESCALING
• Regular descaling of the flat element will improve the performance of your kettle. If the kettle
is not descaled regularly the build up of limescale may result in the following:
- The kettle may take longer to boil.
- The flat element may be damaged.
Pleasenote:Notdescalingyourkettlemayinvalidateyourguarantee.
Whenlimescalestartstobuildupontheheatingelement:
- Buy a suitable descaler from a super market and descale your kettle following the
instructions mentioned on the descaler packaging.
- After descaling, boil with fresh water several times and discard.
- Clean any descaler off the kettle – it can damage the parts.
• Some regions of the country have chalky water. This makes boiled water look cloudy and
leaves deposit on the side of the kettle. This is normal but can be removed with regular
cleaning.
• Alternatively, to reduce limescale build up, use filtered water to fill your kettle.
14-15_GB
3. Unplug the power cord.
Warning!Donotopenthelidwhilethewaterisboiling.
CARE AND CLEANING
• Before cleaning, unplug your kettle and let it cool down.
• Theoutsideandpowerbase: Wipe with a damp cloth, then dry. Never use highly corrosive
or abstractive cleaning agents. Never use metal scouring pads for cleaning.
• Thefilter: Pull the lid lever (5) and gently take off the filter. Either rinsed under the tap or use
a soft brush. Rinse thoroughly. Re-fit to its position. Close and lock the lid by pressing the
lid down.
CAUTION:Neverwashthewaterfilterinthedishwasher.