Installation manual

PCX 256 PROGRAMMING MANUAL
Page: 24 RINS868-6
Visual Keypad Programming Procedure
ASSIGN KEYPADS/READERS
Assign Keypads/Readers
Using the and keys, scroll to ‘ASSIGN
KEYPADS/READERS?’
Press the key
Address
Enter the address of the keypad/reader you wish
to assign. Press the key
Type
Enter : for Keypad (Default for address 00)
Enter : for Reader
Enter : for Not Used (Default for all other
addresses)
Press the key
NOTE: This function will only be displayed if
you have programmed a Reader.
Reader Is
Enter : for Arm Point (Default)
Enter : for S/Part Control
Enter : for Access Control
Enter : for Disarm Only
Press the key
Arm Point Arms / Default Level
Select the Arm Points you would like for ‘arming’
the system. (or for the ‘default level’)
Please note the primary partitions are A,B,C & D.
Press the key. Repeat for Arm Point
Disarms and Arm Point In (if partitions are used).
Press the key.
‘Arm Point Name?’ will be displayed, change the
default text if required.