Installation manual

PCX 256 PROGRAMMING MANUAL
Page: 42 RINS868-6
PGMS
Select the output type for the PGMs and press
the key. Repeat for each PGM.
ATE PINS
When the display shows “ATE pin” you can
decide what you would like the STU / ATE pins
to be programmed as. Select the output type for
the ATE pin and press the key. Repeat for
each pin.
RIX PGMS
Once you return to the sub-menu ‘Endstation
PGMs’ press the key, the display will show
‘RIX PGM’s’, press the key.
Enter the address of the RIX. Press the key.
Select the output type for the PGMs and press
the key. Repeat for each PGM (and RIX
address once you have pressed the  key)
ROX Module PGMS
Once you return to the sub-menu ‘RIX PGMs’
press the key, the display will show ‘ROX
Module PGMs’, press the key if you have a
ROX module installed.
ROX Installed?
If there are remote output expanders
connected to the system, you will need to
assign the address here.
Enter : for No (Default). Enter : for Yes.
Press the key. If Yes is selected, ‘ROX
Address‘ will be displayed. Enter the address,
and Press the key. Select the output type
for the PGMs and press the key. Repeat for
each PGM (and ROX address once you have
pressed the  key)
Keypad PGMs?
Repeat for the Keypad PGMs. Press the key
Repeat for the Reader PGMs. Press the key
You will be returned to the Engineer Menu.