Installation manual

PCX 256 PROGRAMMING MANUAL
RINS868-6 Page: 43
5.15.4 The ‘Follow Input’ PGM
If the expander card is installed the PGM output ‘Follow Input’ is made available. This output
provides the following functionality:
¾ Follow (whilst input active), TIMED or LATCHED output
¾ Follow individual INPUT, PARTITION, SUB PARTITION or SHUNT LIST
¾ Follow WHEN ARMED, WHEN DISARMED or ALWAYS
NOTE: The Follow Input type WILL NOT function correctly if assigned to ATE pins.
Visual Keypad Programming Procedure
CHANGE OUTPUTS
Follow Input
Change Outputs
Using the and keys, scroll to ‘CHANGE
OUTPUTS?’ Press the key
Endstation PGMs
To program the control panel PGMs and the
STU/ATE pins press the key.
Select the PGM you desire, and select the output
type as ‘0035’ = Follow Input. Press the key.
Follow Type?
Enter : for Follow (Default)
Enter : for Timed
(You will need to enter the time you would like
the PGM to be activated for - in seconds)
Enter : for Latched
Press the key.
Follow What?
Enter : for Input (Default)
Enter : for Shunt List
Enter : for Sub Partition
Enter : for Partition
Press the key.