Installation manual

PCX 256 PROGRAMMING MANUAL
Page: 56 RINS868-6
5.22.3 Telephone Line
Dedication Line: When the PC dials the panel, it will respond immediately. (Default)
Shared Line: When the PC dials the panel, it will hang up after the second ring, and dial again.
The first call primes the panel, which will then answer the second call.
5.22.4 ARM / Modem Telephone Number
To be used in conjunction with the ‘DIAL OUT MENU’ function (see page: 64), these are
programmed for the appropriate PC. For example, the line the PCX is connected to might have
“bar incoming calls” therefore you can have the PCX dialling a PC, you will just need to enter a
‘Modem Telephone Number’, i.e. the number that the PC’s modem is connected to, and then exit
engineers (to save all the data) and go to dial out menu and select the operation. The arm
telephone number is used to send information to the PC software for monitoring purposes.
Visual Keypad Programming Procedure
SET UP DOWNLOADING
Set Up Downloading
Using the and keys, scroll to ‘SET UP
DOWNLOADING’. Press the key
Download By
Enter : for None (Default)
Enter : for Modem. Enter : for RS232
Press the key.
Security Mode
Enter : for Auto Answer (Default)
Enter : for Panel Dials
Enter : for Dial Back. Press the key.
Telephone Line
Enter : for Dedicated (Default)
Enter : for Shared. Press the key.
Number of Rings To Prime
Only available if ‘Modem’ has been selected.
Enter the number of rings needed to prime the
panel to answer the next call (1-15). Press the
key. (Default is 03) Modem Speed
will be
displayed. DO NOT ALTER THIS SETTING