Operation Manual

6 7

All the loudspeakers may be operated close to TV monitors with no ill-

effects with the exception of the 3060S which should not be operated

within 500mm of TV screens monitors or other magnetically sensitive

equipment. Plasma and LCD screens are unaffected.

Positioning

3010i and 3020i

The 3010i and 3020i are ideally mounted on Q Acoustics oor stands or wall mounted. If you are stand

mounting, a simple guide is that the treble unit should be at ear level to a seated listener. Wall mounted

speakers may be mounted slighter higher with the speaker angled down. Stand mounted speakers

should be treated as oorstanding speakers except that the speaker may be placed a little closer to the

back wall. Shelf mounting is also possible.

An optional bracket designed specically to wall mount the Q Acoustics 3010i, 3020i and 3090Ci is

available from your dealer. Floor stands for the 3010i and 3020i are also available. Be prepared to

experiment to nd the best setup for your taste in your particular listening room.

3050i

The 3050i loudspeakers

should be positioned at least

200mm from a back wall and

500mm from the side walls.

Placing the speakers closer

to the wall will increase bass

but could cause the sound to

boom and lack precision and

detail. The speakers should be

2m - 4m apart and central to

the seated listener. Turning the

speakers slightly inwards will

sharpen a stereo image but

may cause narrowing of the

sound source.

Subwoofer

Bass frequencies are substantially omni directional. Although this means that you can position the

subwoofer almost anywhere, the stereo image will still benet by positioning the subwoofer level with

the front loudspeakers and as central to the listening position as possible. This may not be feasible in

a multichannel system. If you place the subwoofer close to a wall the bass will be re-enforced therefore

in some locations the bass may be boomy and indistinct.

ENGLISH (EN)

> 200 mm

2.0 - 4.0 m

> 500 mm