1. Position the speakers in your room and select LEFT or RIGHT for the speaker position using the switch at the rear of the speaker: Boundary condition switch Firefight position switch 2. Set the Boundary Condition Switch to the correct position depending on the location of the speaker. The foam port bung supplied is optional for any of the boundary settings but is required when the speaker is positioned flat against a rear boundary: Speaker located in a corner Hu (less that 0.
1. Connect power 2. Turn on at wall © Power © WI-Fi router (optional, cable not supplied) @® Digital and analogue inputs (refer to full manual for detail) 1. Connect all required inputs 2.
When the hub powers up, you will see a sequence of flashing LED on the front. Pair your remote by holding the ‘Remote pair’ button on your remote until the remote LED on the hub stops flashing and turns solid white (ensure 2 x AAA batteries supplied are fitted). (a) Remote pair Q After three minutes the flashing LED's will stop and you will be left with a solid red LED next to the Standby button.
Chrome cast butt-in For Google Somme users go straight to your Google Home App to configure your Q Active system. Once set up you can download the Q Active app at your convenience to access more control for your system. J pr—— For on-line video setup tutorials visit our knowledge base at www. acoustics. uk/kb Note: It is possible to return to the WI-Fi setup for streaming music as Bluetooth®, digital and analogue inputs do not require this to be set up.
The system will automatically wake from standby when music is detected. Control your speakers from your chosen app, or via the remote for any of the connected digital and analogue inputs.
Q Acoustics Media products are wanted free of defects In materials and workmanship for a period of 1 year from the date of purchase. During the warranty period Gt Acoustics wil, at ts caption, repair of replace any product found to be fay after Inspection by the company of Its appointed distributor or agent. Misuse and felt wear and tear ere not covered by warranty. Goods for repair should In the first Instance be resumed to the supplying dealer.