User's Manual

4 – Managing Switches
Configuring a Switch
4-26 59056-02 A
0
4.7.4
SNMP Properties
Use the SNMP Properties dialog shown in Figure 4-11 to change SNMP
configuration parameters. After making changes, click the OK button to put the
new values into effect. To open the SNMP Properties dialog, select a switch in the
topology display or open the faceplate display, open the Switch menu and select
SNMP Properties.
Figure 4-11. SNMP Properties Dialog
Note: Since Read Community, Trap Community, and Write Community
settings are like passwords, they are write-only fields; the current
settings are not displayed.