User's Manual

2 – Using SANsurfer Switch Manager
Using the Faceplate Display
59056-02 A 2-31
0
2.12.2.2
Opening the Faceplate Popup Menu
To open the popup menu, right-click on the faceplate image to present the
following tasks.
 Refresh the switch
 Select all ports
 Manage switch properties
 Manage network properties
 Manage SNMP properties
 Extended credits wizard
 Manage port properties
 Change the port symbolic name
 Run the port loopback tests
If no ports are selected, the port-related tasks will be unavailable in the menu.
Right-click a port to open the Port popup menu. Hold down the Shift or Control key
to select more than one port. If multiple ports are selected, right-click one of the
selected ports.
2.12.3
Faceplate Data Windows
The faceplate display provides the following data windows corresponding to the
data window tabs:
 Devices – displays information about devices (hosts and storage targets)
connected to the switch.
 Switch – displays current switch configuration data.
 Port Statistics – displays performance data for the selected ports.
 Port Information – displays information for the selected ports.
 Configured Zonesets – displays all zone sets, zones, and zone membership
in the zoning database.