QUICK START GUIDE [ Quick Start Guide ] iSCSI HBA INSTALLATION QLA®4050/4050C/4052C QLE4060C/4062C d
Purchasers of OEM products should consult with the OEM for support. Support Headquarters QLogic Corporation 12984 Valley View Road Eden Prairie, MN 55344-3657 QLogic Web Site www.qlogic.com Technical Support Web Site support.qlogic.com Technical Support Email support@qlogic.com Technical Training Email tech.training@qlogic.com North American Region Email support@qlogic.com Phone +1 952-932-4040 Fax +1 952-932-4018 Europe, Middle East, and Africa Region Email emeasupport@qlogic.
Quick Start Guide Installation Instructions This Quick Start Guide describes how to install and configure your new QLogic SANblade® host bus adapter (HBA) and SANsurfer iSCSI HBA Manager application in four simple steps: ❑ Step 1. Verify the package contents. ❑ Step 2. Install the HBA hardware. ❑ Step 3. Install the HBA driver. ❑ Step 4. Install the SANsurfer iSCSI HBA Manager application. Keep the HBA in the antistatic bag until installation.
Step 1. Verify the Package Contents The QLogic HBA is shipped with the following items: ❑ ❑ ❑ ❑ QLogic SANblade HBA Low-profile bracket (not available in all models) Quick Start Guide (this document) SANsurfer® for SANblade iSCSI HBAs CD(s) Step 2. Install the HBA Hardware NOTE: When installing the QLogic HBA and driver in a Solaris system that does not already have QLogic HBAs or drivers installed, please install the QLogic Solaris driver before you install the QLogic HBA hardware.
3. Pull out the slot cover (if any) by removing the screw or releasing the lever. 4. Grasp the HBA by the top edge and seat it firmly into the slot. 5. Refasten the HBA’s retaining bracket using the existing screw or lever. 6. Close the computer cover. 7. Plug in the power cable and turn on the computer. HBA LEVER 64-BIT PCI-X SLOT (QLA405x HBAs) OR SCREW PCI EXPRESS x4, x8, x16 SLOT (QLE406xC HBAs) BA RETAINING BRACKET SLOT COVERS SYSTEM CHASSIS Sample motherboard and slots Step 3.
4. NOTE: In the Install Hardware Device Drivers dialog box, select Search for a suitable driver for my device (recommended). Click Next. 5. In the Locate Driver Files dialog box, select Specify a Location. Click Next. 6. In the Copy manufacture's files from: dialog box, type or browse the path to the directory where you stored the driver files (see step 2). Click OK. 7. In the Driver Files Search Results dialog box, click Next. 8.
11. In the Hardware Installation - Windows Logo dialog box, click Continue Anyway. 12. In the Completing the Found New Hardware Wizard dialog box, click Finish. Windows Vista Initial Operating System Installation with the HBA Driver as Boot or as an Add-On Perform the following steps to install the Windows Vista operating system and the HBA driver (as boot as or as an add-on): 1. Start the Windows installation procedure using the Setup CD. 2.
Linux (Driver and RAMDisk Image) The following installation instructions are applicable to SLES 9 (or later) or Red Hat Enterprise Linux 4.0 (or later). For more information and driver installation instructions for other Linux operating system versions, see the README.txt file associated with the driver. 1. Download the latest driver file qla4xxx-vx.yy.zz.tar.gz from the SANsurfer for SANblade iSCSI HBAs CD. The driver is located in the following directory: autoplay\iscsi_HBA_drivers\Linux 2.
To unload the driver, perform the following steps: 1. Login to the Solaris system as root. 2. Type the following command: 3. pkgrm QLA4xxx-0 Type the following command to reboot the system: reboot -- -r Step 4. Install the SANsurfer iSCSI HBA Manager Application To install the SANsurfer iSCSI HBA Manager application: 1. Insert the applicable SANsurfer for SANblade iSCSI HBAs CD into your CD-ROM drive (if the auto-run screen does not appear, open the start_here html page with your browser.) 2.
Warranty The QLogic SANblade HBA comes with a standard three year QLogic warranty. Please check the QLogic Web site at http://support.qlogic.com/support/warranty.asp for warranty details. Laser Safety FDA Notice This product complies with DHHS Rules 21CFR Chapter I, Subchapter J. This product has been designed and manufactured according to IEC60825-1 on the safety label of laser product.
VCCI compliance: Class B AS/NZS CISPR22 compliance: Class B CNS 13438 compliance: Class B MIC compliance: Class B ❑ Korea MIC Class B Certified Product Name/Model Certification holder Manufactured date Manufacturer/Country of origin B class equipment (Household purpose info/telecommunications equipment) ❑ iSCSI HBA QLogic Corporation Refer to date code listed on product QLogic Corporation/USA As this equipment has undergone EMC registration for household purpose, this product can be used in any area inc
10
© 2005–2007 QLogic Corporation. QLogic, the QLogic logo, the Powered by QLogic logo, SANbox, SANsurfer, and SANsurfer Management Suite are registered trademarks or trademarks of QLogic Corporation. All other brands and product names are trademarks or registered trademarks of their respective owners. Information supplied by QLogic is believed to be accurate and reliable. QLogic Corporation assumes no responsibility for any errors in this brochure.
*IS0054501-00C* J QLogic Corporation 949.389.6000 26650 Aliso Viejo Parkway www.qlogic.
