user manual

2 – Operations and Administration
Spine View Menu
2-60 D000003-006 Rev. A
Q
2.3.2
Select Boot Image
The Select Boot Image button allows the user to choose an alternative boot image
for the switch. To select a boot image:
Figure 2-84. Select Boot Image Button
1. From the menu, select Maintenance.
2. Click Select Boot Image. The Boot Image Selection screen is displayed:
Figure 2-85. Boot Image Selection Screen
NOTE: By mousing over either radio button in the Boot Image Selection screen,
the user can glean additional information about each file, as shown in
Figure 2-86 below:
Figure 2-86. Boot Image File Pop Up
To choose a new boot image: