user manual

FC0054607-00 A ix
 2 Installation details the supported features and covers installation of
hardware, drivers, and SANsurfer
®
management tools.
 3 Configuration covers how to identify QLogic adapters, start Fast!UTIL,
verify that the driver is loaded, configure driver parameters, deploy N_Port
ID virtualization (NPIV), monitor NPIV from the SANsurfer management
tools, and configure the boot from SAN functionality.
 A Troubleshooting details troubleshooting methods, including LEDs and
logs.
At the end of this user’s guide you will find a glossary of terms and an index to
help you quickly find information.
Documentation Conventions
This guide uses the following typographic conventions:
 Tex t i n bold font indicates user interface elements such as a menu items,
buttons, check boxes, or column headings. For example:
Under Hardware, click Storage Adapters.
 Text in a monospace font (Courier New) indicates file name, directory
path, or command line text output. For example:
Enter an IP Address:
 Text in a bold monospace font (Courier New) indicates user input (what
you type). For example:
# chkconfig firewall off
 Tex t i n ALL CAPITALS indicates the name of a key that you press on the
keyboard. For example:
On the QLogic BIOS banner screen, press
CTRL+Q .
 Tex t i n italics indicates emphasis, terms, document titles. For example:
Refer to the VMware IO Compatibility Guide.
 Italicized text within angle brackets indicates user-defined variables. For
example:
cat /proc/scsi/qla2xxx/<adapter_number>
NOTE:
Notes provide additional information.