Hardware Instruction Manual

SuperDVR & H.264 Series Cards

User Manual

Error! Use the Home tab to apply

标题

1 to the text that you want to

appear here. Error! Use the Home

tab to apply

标题

1 to the text that

you want to appear here.

Figure4-2 Caption and General Configuration

1. Dwell Interval.

If users enable Auto Dwell function on the main interface page, users can set

the dwell time, in seconds, of a screen here.

2. Caption

There are four options, None, ID, Name, and ID/Name for users to select for

all the channels.

• ‘None’ means no title or name;

• ‘ID’ means camera numbers, i.e. 1, 2, 3 and so on;

• ‘Name’ means camera names, i.e. Cam1, Cam2 and so on;

• ‘ID/Name’ means both camera number and camera name, i.e. 1/Cam1,

2/Cam2 and so on.

3. Resolution

There is one resolution option, 320×244 for users to select for all the

channels.

4. Call Monitor

Users can connect another monitor to the card and select the display modes

here.

The following area is for your recording data storage area. Please see section

3.3.8.

Figure4-3 Record Data Storage Precept

SuperDVR shows all the available HDD partitions for users. Users can select

one or more of the partitions that will be used in sequence from top to bottom.

Please refer to section 3.3.8 to learn more about recycling records.