Quick Start Guide model QR4174-418 4 CH. H.
Box Contents installation made easy 4 Cameras with Stands QSDR74RTS DVR w/Built-in 7” LCD Display Screen Pre-Installed Hard Drive 2 QSDS0612D Cameras (6mm Lens) 2 QSDS3612D Cameras (3.6mm Lens) Power Supply & 4 -Way Splitter For Cameras Power Supply For DVR 1 Connect one end of the 60 Ft. cable to the cable that is pre-connected to a camera. 2 Connect the other end of the 60 Ft. extension cable to the DVR.
SETTING UP CAMERAS FOR VIEWING AND RECORDING DVR Controls Front Panel 1 2 3 4 5 6 7 8 9 10 11 12 13 1. From the Main menu, select CAMERA to setup the name display (up to 8 characters) and position of each channel (camera). 2. Select COLOR SETUP to adjust the image brightness, saturation, contrast and hue settings for each channel (camera). 14 15 16 17 18 19 20 21 1. Enter/Exit Display Screen 2. 7” LCD Screen for Monitoring 3. Show Menu 4. Scroll Down in Menu 5. Scroll Up in Menu 6.
Manual Recording: Motion Detection Recording: From the Record Setup screen set the Rec Mode to “ALWAYS”. Your DVR will continuously record and separate files will be created with the Pack Time intervals you selected. From the Record Setup screen, set the Rec Mode to “TIME SCHEDULE RECORD” and click “SCHEDULE” in green. This will display the Schedule menu (See “SCHEDULE” image on previous page). The options are: All, CH-1, CH-2, CH-3, and CH-4 respectively.
setting up the dvr to playback Search Playback From the Main Menu select SEARCH to display the Video Search Menu shown to the right. If you input a specific date and click Search, you will find all the recordings for that day. When you select an item, you will playback the recordings in 4 channel mode; or, click [File list] button to display File list interface, where you can playback or backup the file you selected. See File List heading below.
