Q-See Q25DVR4ES User's Manual Q25DVR4ES Economy Series User Manual Contact Us: Q-See Products 8015 E. Crystal Dr Anaheim, CA 92807 Website: http://www.q-see.com Customer Service: Phone: 877-998-3440 x 538 Email: cs@dpsi-usa.com Tech Support: Phone: 877-998-3440 x 539 Email: ts@dpsi-usa.
Q-See Q25DVR4ES User's Manual Q-SEE Product Warranty Thank you for choosing our products. All of our products users have a conditional free warranty repair service for hardware within 12 months starting from purchase date, and a free exchange service within one month (valid for manufacturing defects). Permanent upgrading service is provided for the software.
Q-See Q25DVR4ES User's Manual Q-See Q25DVR4ES User's Manual Chapter 1: DVR Features Chapter 10: Appendix - 10.1 System Connection Diagram 4 Channel BNC Camera Input. 1 Channel BNC Video Output. Video Source Option: NTSC / PAL. Motion Detection with Sensitivity and Area Settings. Time Schedule Recording / Motion Triggered Recording. One ATA-100 Hard Disk Interface. USB 2.0 Back up to computer. With Remote Control & Removable Hard Drive Tray. Chapter 2: Layout - 2.
Q-See Q25DVR4ES User's Manual Q-See Q25DVR4ES User's Manual Chapter 2: Layout - 2.2 Rear Panel Camera Specifications 1 2 4 3 5 1. 1 x BNC VIDEO OUTPUT 2. FAN 3. 4 X BNC VIDEO INPUT 4. 12V DC POWER SUPPLY 5. USB 2.0 PORT Chapter 2: Layout-2.3 Remote Control 01. CH1 02. CH2 03. CH3 04. CH4 05. QUAD 06. 07. 08. 09. 10. 11. 13. MENU 14. UP 15. SEL/Edit 16.
Q-See Q25DVR4ES User's Manual Q-See Q25DVR4ES User's Manual Chapter 3 : Installation - 3.1 Installing Hard Drive Chapter 9: Specifications NOTE: This package comes with a 250GB hard drive. You would follow these instructions if you want or need to install a new hard drive. DVR Specifications 1. Slide the HDD tray out of DVR body carefully. 2. Connect the power cord and data cable to hard disk drive carefully. 3. Insert the HDD tray into DVR body. 4. Lock the HDD tray.
Q-See Q25DVR4ES User's Manual Press to configure the DVR play/record system. Q-See Q25DVR4ES User's Manual Chapter 3: Installation - 3.2 Connecting Cameras and TV Monitor There are 4 camera inputs and 1 video output with BNC connectors (Refer to Chapter 2: Layout -2.2 Rear Panel). 1. Connect the camera cables from the camera to the 4 Video Inputs on the DVR. 2.
Q-See Q25DVR4ES User's Manual Q-See Q25DVR4ES User's Manual Chapter 4: System Boot - 4.2 Recovering Lost Data The system will automatically recover lost data. A Power Error can cause data to be lost. Chapter 4: System Boot - 4.3 Restore Recording Feature If a Power Error occurs during recording process, the system will automatically resume recording after power is restored. 1 DVR Event List 2. Capture one frame picture 3. Save DVR's Recorded Video to PC 4. Configuration 5.
Q-See Q25DVR4ES User's Manual Q-See Q25DVR4ES User's Manual Chapter 5: DVR Setup - 5.1 Setup Menu Press [ Menu] to enter the setup menu; Use [ Up] and [ Down] to select item; Press [ Select] to modify settings and [ Menu] to exit. Menu Directory Chapter 8: USB DVR Access - 8.
Q-See Q25DVR4ES User's Manual Q-See Q25DVR4ES User's Manual Chapter 5: DVR Setup - 5.2 Camera Select SEARCH TIME 1 2 2008/01/08 08:30:56 The DVR system can display 4 camera feeds in one picture (Quad Mode). Users can configure which camera is displayed. Press [ Select] to modify setting and press [ CH1], [ CH2], [ CH3],[ CH4] to set each channel separately. If the channel is disabled, the system will display OFF on the monitor.
Q-See Q25DVR4ES User's Manual Q-See Q25DVR4ES User's Manual Chapter 6: Recording -6.3 Recording Time on Hard Drive [QUAD] button and hold for three (3) seconds to make each video channel enlarge to full screen. The full screen will be displayed for three (3) seconds, including Quad view. The Loop Function will continue until any button is pushed. For example, [Stop] will stop the Loop function and may stop the recording depending on Record Schedule Settings. 2.
Q-See Q25DVR4ES User's Manual Q-See Q25DVR4ES User's Manual Chapter 5: DVR Setup - 5.7 Schedule Set Chapter 6: Recording - 6.1 Start Recording User can setup video recording method by Time, Motion Triggered and Continuous Recording. Press [ Record ] to start recording (As set in 5.7 Schedule Set). System will display information on Screen. NOTE: Only EACH Mode can enlarge single channel to full screen display. "-" No Recording. "T" Continuous (System Default). "A" Motion Triggered.
Q-See Q25DVR4ES User's Manual Q-See Q25DVR4ES User's Manual Chapter 5: DVR Setup - 5.15 NTSC/PAL Output Selection Chapter 5: DVR Setup - 5.10 Sub Menu-Password Change Change the J10 jumper on the system board to select NTSC or PAL video output as marked on the silkscreen of the system board. NTSC/PAL Select System default password: Press [ CH1] button six times. User needs to enter six characters for the password. All keys can be used as password key except the [ Menu] key, which is used to exit.
Q-See Q25DVR4ES User's Manual Q-See Q25DVR4ES User's Manual Chapter 5: DVR Setup - 5.12 Sub Menu-Time Set Chapter 5: DVR Setup - 5.14 Motion Setup To configure the DVR's time: MOTION RECORD TIME: Press [ Up] and [ Down] to move prompt. Press [ Select] to modify. Press [ Menu] to save and exit. MOTION ALARM TIME: This number indicates how long the triggered recording lasts after the DVR has been triggered by motion.
