Quick Installation Guide 4 Channel H.
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QR404-414 PART 1 - PACKAGE CONTENTS: QR404 DVR Power Supply For DVR Software CD 4 Cameras with Stands (2) QSC1336B (1 w/Audio) (2) QSC1330B (1 w/Audio) Pre-Installed Hard Drive User’s Manual Power Supply & 4 -Way Splitter For Cameras Camera Cables (2 w/o Audio) Camera Cables (2 with Audio) Ethernet Cable USB 2.
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QR404-414 PART 2 - DVR CAMERA AND POWER CONNECTIONS Please note that it is STRONGLY recommended to use a surge protector that is UL-1449 rated. Look for a clamping voltage of 330 or lower, a Joule rating of at least 400 and a response time of 10 nanoseconds or less.
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QR404-414 PART 4 - CONNECTING THE DVR TO YOUR TV 1. Plug the BNC to RCA adapter in to Video Out port then connect the RCA cable (not included) to the DVR. 2. Connect the other end of the RCA cable to the Video Input on the TV if you are using a television screen. 3. If you are using a PC monitor, plug the VGA cable (not included) to the VGA port on the DVR. 4. Connect the other end of the VGA cable to the monitor.
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QR404-414 PART 5 - DVR CONTROLS: FRONT PANEL Item Number Button Name 1 POWER INDICATOR 2 IR Receiver 3 HDD Symbol Function If the “Green” Indicator Light is on, the System is Getting Power Receives Signal from Remote Control When the “Red” Indicator Light Flashes, it Means the Hard Drive is Being Read or Written to CH 1 CH2 4 Select Single Channel Display CH3 CH4 5 QUAD Display all Cameras in Live Display or Playback Mode 6 REW Move Left/Rever
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QR404-414 PART 6 - ACCESSING THE DVR MENUS Choose MENU by right clicking on the mouse or by pushing the MENU button on the DVR front panel or remote control. The Main Menu offers the following Setup Features: CAMERA: Setup name display, position, image view, and record quality of each channel (cameras). RECORD: Enable recording & audio, set resolution & quality, recording mode and file size. NETWORK: Setup Network access (Remote Internet Monitoring).
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QR404-414 PART 8 - TO START RECORDING This System offers 3 modes for recording: 1. Manual 2. Time Schedule 3. Motion Detection. From the main menu, select RECORD to enter into the Record Setup menu (shown at right). CHANNEL: “ON” enables video to record from the respective camera. If the channel is set to “OFF”, video from that channel will not record.
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QR404-414 Motion Detection Recording: From the Record Setup screen, set the Rec Mode to “TIME SCHEDULE RECORD” and click “SCHEDULE” in green. This will display the Schedule menu (See picture above). The options are: All, CH-1, CH-2, CH-3, and CH-4 respectively. The channel you select will be highlighted in “Blue”, and the unselected channels will be “Grey.
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QR404-414 PART 9 - SETTING UP THE DVR TO PLAYBACK Searched Playback: From the Main Menu select SEARCH to display the Video Search Menu shown to the right. If you input a specific date and click Search, you will find all the recordings for that day. When you select an item, you will playback the recordings in 4 channel mode; or, click [File list] button to display File list interface, where you can playback or backup the file you selected.
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QR404-414 Questions or Comments? Contact Us: Mailing Address: Customer Service: DPS, Inc. 8015 E. Crystal Dr. Anaheim, CA 92807 Phone: 877-998-3440 x 538 Email: cs@dpsi-usa.com Live Chat from our Website Website: Tech Support: http://www.q-see.com Fax: 714-998-3509 Phone: 877-998-3440 x 539 Email: ts@dpsi-usa.