Quick Installation Guide 4 Channel H.
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QR4074-411 PART 1 - PACKAGE CONTENTS: QR4074 DVR w/Built-in 7” LCD Display Screen Power Supply For DVR Software CD 4 - Color CMOS Cameras with Stands (4) QSM1424C (6mm Lens) (4) QSM1424W (3.6mm Lens) Power Supply & 4 -Way Splitter For Cameras Ethernet Cable 1|Page Pre-Installed Hard Drive User’s Manual Camera Cables (4 Included) BNC (M) – RCA (F) Adapter USB 2.
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QR4074-411 PART 2 - DVR CAMERA AND POWER CONNECTIONS Please note that it is STRONGLY recommended to use a surge protector that is UL-1449 rated. Look for a clamping voltage of 330 or lower, a Joule rating of at least 400 and a response time of 10 nanoseconds or less.
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QR4074-411 PART 3 - DVR CONTROLS: FRONT PANEL Device LCD Item Number Button Name / Symbol 1 POWER 2 3 4 5 MENU + MENU 6 DVR 7 8 ENTER 9 REC. 10 11 PWR IR Receiver Function On: The LCD screen is displayed in a basic activation status; Off: The LCD screen enters into sleep mode. Press once to display LCD main menu. Press again to exit LCD main menu.
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QR4074-411 PART 4 - ACCESSING THE DVR MENUS Choose MENU by right clicking on the mouse or by pushing the MENU button on the DVR front panel or remote control. The Main Menu offers the following Setup Features: CAMERA: Setup name display, position, image view, and record quality of each channel (cameras). RECORD: Enable recording & audio, set resolution & quality, recording mode and file size. NETWORK: Setup Network access (Remote Internet Monitoring).
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QR4074-411 Grid Explanation: Red = Alarm (motion detection) recording Green = General (time schedule) recording Transparent = No recording Blue = The channel and date selected. Manual Recording: From the Record Setup screen set the Rec Mode to “ALWAYS”. Your DVR will continuously record and separate files will be created with the Pack Time intervals you selected.
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QR4074-411 The Motion detection Menu has three sections, including Channel Status, Sensitivity and Motion area. STATUS: This option allows you enable motion detection on any channel. SENSITIVITY: This option allows you to set sensitivity level of motion detection from 1 to 4, with 4 being the highest. Next, click on the MD AREA SETUP button, which will display the picture on the left. This option allows you to select the area you want to be sensitive to motion.
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QR4074-411 PART 8 - BACKING UP THE VIDEO ON THE DVR Attach a USB flash drive or USB hard drive to the USB backup port and follow the instructions in Part 8 to go to the File List in the Search menu. If you want to backup a single recorded file from the file list, from the File List dialog box pictured above, select the file you wish to back up by placing a check mark in the accompanying green box and hit the [BACKUP] button on the right of the screen.
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QR4074-411 Questions or Comments? Contact Us: Mailing Address: Customer Service: DPS, Inc. 8015 E. Crystal Dr. Anaheim, CA 92807 Phone: 877-998-3440 x 538 Email: cs@dpsi-usa.com Live Chat from our Website Website: Tech Support: http://www.q-see.com Fax: 714-998-3509 Phone: 877-998-3440 x 539 Email: ts@dpsi-usa.
