Quick Start Guide DVR Setup 16 Channel DVR Model: QSTD501616C 1 Connect 2 Setup 3 Enjoy What’s Whatís in the box? check that your package includes the following: DVR . Manual USB Mouse RCA-BNC x2 500 GB Hard Drive Ethernet Cable Remote Control QPSCDCA Power Supply x4 60 ft. Camera Cables with Audio x4 Cameras x4 - QD28414 x4 - QD28414W Digital Peripheral Solutions, Inc. 8015 East Crystal Drive, Anaheim, CA 92807 www.Q-See.
1 Connect 1 CONNECTING CAMERAS: QD28414W & QD28414 A Connect the 60 ft.
4 CONNECTING TO A TV OR VGA MONITOR 3 CONNECTING CAMERAS: QPSCDCA A B C D E Connect the video and power connectors from the cable to the camera Connect the other video connector on the other end to the Video In port on the DVR Connect the power connector on the other end of the cable to the power adapter Attach the power adapter to a power source NOTE: To record sound from the camera attach the audio connector to the camera Attach the audio connector on the other end of the cable to an Audio In port on th
2 Setup To navigate through the DVR menu, three options are available: 1. DVR Front Panel: Use the DIRECTION keys to move the cursor and the ENTER key to select 2. Remote Control 3. USB Mouse (included) B Setting up the DVR to Record: This system offers four modes for recording: 1) Manual, 2) Schedule, 3) Motion Detection, and 4) External Sensor. For setup of external sensor alarms refer to sections 2.3.2 and 3.3.5 of the user’s manual.
C Setting up the DVR to Playback Files C1 B5 C2 Display the SYSTEM screen (B5) and select the MOTION option (GREEN box). Press the SEARCH key on the DVR, enter User Id and Password if the system is password protected. The SEARCH option will display (C1). Select Time Search (C1 RED box) and press the ENTER key. B6 Push ENTER to put a check mark in the enable option (BLUE box), and select the SET button (RED box) in the Trigger options to display (B7).
D Setting up the DVR to Backup Files NOTE: If you stop recording while backing up the files, the backup will go faster. Insert a USB flash drive into the USB port located on the front of the DVR. Press the BACKUP button and enter the User Id and Password if the system is password protected. This will display the BACKUP screen shown in (D1). Select the Date icon and push ENTER. Select the date of files to backup. The days with files will be highlighted.
