Technical Manual

70 71
ACCOUNT
This is the account management window which allows you to add or delete users, create user
groups, modify the access privileges of users, and create or change passwords.
There are two pre-configured default
users; Admin, and 666666. Only Admin has
administrator rights.
When adding a user, you not only create their
user name and password, but you can grant
or deny control over specific activities on the
NVR, including which cameras that user can
view or play back. These privileges can be
changed later by an administrator-level user
using the Modify User button. Administrator
Users have control over 60 different functions
while basic Users have 35 functions that can
be allowed or denied.
PICTURE 4-35
PICTURE 4-36
A user or group name can consist of at most eight characters and no two users may have the
same user name. There is no limit to the number of users or groups.
The Memo field allows you to include a note about the user or group that is only visible in this
window.
Toggling the Reusable box allows more than one user to log in using this account
Creating a group gives you the ability to set the access privileges for as many users and any
users’ rights cannot exceed that of the group they are in.
Selecting Modify Password opens a new window which allows you to select the user whose
password you want to change. Enter the old password and then the new password twice.
AUTO MAINTENANCE
Much like a regular computer, this NVR
benefits from being restarted after extended
periods of operation.
You can determine when the system will
automatically reboot and you can optionally
have it auto-delete old files at that time as
well. You can set this option to delete files
that are 1-31 days old.
4.6 BACKUP
This window was covered in Section 3.6 Backup
4.7 SHUTDOWN
This is the preferred method to use when shutting down the NVR.
When this window is opened, you have the
option of logging out as a user, switching the
user, shutting down the system or restarting
it.
After selecting Shutdown, the NVR will stop
recording, the hard drive will stop and you will
be able to turn it off using the power switch
on the back panel.
PICTURE 4-37