Quick Start Guide

PART 1 - PACKAGE CONTENTS
QC444 DVR
Pre-Installed
Hard Drive
Power Supply
for DVR
Manual and
Software CD
Ethernet
Cable
Video and Power
Camera Cable
Remote
Control
4 Color Cameras with Stands
(403 & 411)
2 Color Cameras with Stands
2 Decoy Cameras
(426)
2 BNC(M) to RCA(F)
Adapters
Power Supply & 4-Way Splitter
(403 & 411)
2-Way Splitter
(426)
USB 2.0
Mouse
PART 2 - DVR CAMERA AND POWER CONNECTIONS
Revised
5/18/11
VGA
DC 12V
AUDIO OUT
VIDEO OUT
1
2
3
4
1
2
STEP 1: Connect the Cameras
to the Cables
Connect both camera leads to the matching
ends on the power/video cable.
Repeat for all cameras.
1A
Attach the BNC connector on the power/video cable to a
Video In port on the DVR. Repeat for all cameras.
1B
Connect the remaining
connector to one of the
ends on the power
splitter. Repeat for all
cameras.
STEP 2:
Connect the single end
of the power splitter to
the included power supply.
STEP 4:
Connect both power supplies to
a surge protector.
STEP 5:
Connect thesurge protector
to an outlet.
STEP 3:
Connect the other power supply to the DVR .
1C
IMPORTANT! It is STRONGLY recommended to use a surge protector that
is UL-1449 rated. Look for a clamping voltage of 330 or lower, a Joule rating
of at least 400 and a response time of 10 nanoseconds or less.
The appearance
of contents may
differ from images
shown.
manuals an d
software
QC Seri es