Remote Monitoring Guide

54 55
For systems that are not connected to the same network as the computer you are running
Smart PSS on, you must use the Manual Add button.
You’ll need to manually add the information
needed for the program to connect to the
item.
Title - Name the device to make it easy to
identify from the other systems you
may be controlling.
Group Name - Enter the name of an
established group. Or, if you’ve not
created one yet, enter the group
name and make sure that the Create
Group box at the bottom of the
window has been checked.
Type - Select whether the device is a DVR,
NVR or IP Camera (IPC).
IP/Domain Name - This should be the
public (Internet) address that you
obtained when setting up your DVR
(see Confirming That Ports are
PICTURE 3-66
Opened in Section 1.2 of this manual). It may also be the Dynamic Domain Name
Service (DDNS) address you created in Section 1.6.
Regardless of which you choose, you will not be able to connect to the DVR using
its local network address because your computer and system are not on the same
network.
Port - The default for your device will be 3777, but if you’ve changed it during setup, then you
will need to enter the correct number in this field.
User Name & Password - Enter the User Name and Password that you use to log into your
system.
Get Info - Click on this to have Smart PSS query the device. Device Model and Serial
Number are read-only, but they and the other fields will be auto-filled.
Clicking on one will reveal three tools under the Operations heading at the far right.
PICTURE 3-67
Once you have finished adding systems to your Smart PSS program, you’ll return to the Add
Device tab and will see your devices listed.
Modify
Opens Manual Device
Addition window
Device Configuration
Opens Device
Configuration window
Delete
Remove device
You can also remove a device from Smart PSS by checking the box to the left of the device’s
name and clicking on Delete at the bottom of the window.
Clicking on the Next button on the bottom right of the window will take you to the Group
Manager tab. You can also switch between the two tabs simply by clicking on them.
Creating a Group
When you add an NVR or DVR, it will most likely be its own group. However, you can create a
new group using selected cameras from multiple systems up to 36 cameras.
1. Click on the New Group button on the left of the window and name your new group.
2. Choose a DVR, NVR or IP Camera from the Device List on the right. When selected,
all of that device’s channels will display in the middle.
3. Select the cameras that you wish to add to your new group and then click on the <<
button. They will appear in the group’s list of cameras.
4. To add cameras from another device to this group, repeat steps 1-3.
PICTURE 3-68