Technical Manual

42 43
PICTURE 4-7
PICTURE 4-8
PICTURE 4-9
Firmware Tab
You can view the firmware version - shown as
System Version - of the cameras connected to
your NVR.
Upgrade Tab
You can upgrade the firmware of your cameras -
including those connected remotely.
1 Download the camera firmware file on a
computer
2 Load the camera firmware file onto a
removeable USB drive.
3 Insert the USB drive into a port on the NVR that
is not being used by the mouse.
4 Click Select and navigate to the file on the USB
drive.
5 Once you’ve selected the file, click on Begin to
start the upgrade.
IMPORTANT! Only upgrade a
camera’s firmware to fix a problem
or add a needed function! DO NOT
remove the USB drive while the
upgrade is taking place or you can
permanently disable the camera.
IMAGE
Use this submenu to adjust the video image for each camera.
•SelectthechannelyouwishtomodifyinChannel.
Mirror - Image will be “backwards”
Saturation, Brightness, Contrast, Sharpness sliders - manually adjust video image.
Flip - Image will be upside down.
Light - Lightens picture. Stop disables this feature.
Scene Mode - Preset color settings for a variety of environments, plus user-customizable options.
The Blue and Red gains may be adjusted between 0 and 100. The default is 50.
Stop turns this feature off.
Daylight - Preset options for changing light conditions
 •Colorful–Videoimageisshiftedtowardsredhues.
 •Auto–Constantlyadjustscolorbalancetomaintainaccuratcolors.
 •B/W–Camerawillonlyoperateinblackandwhitemode.
 •ByTime–Colorisajustedatspecictimes.
•ClickApply to test your settings.
•ClickSave before exiting this window to preserve your changes.
PICTURE 4-10