Remote Monitoring Guide

54 55

Clicking on one will reveal three tools under the Operations heading at the far right.

PICTURE 3-69

Once you have ﬁnished adding systems to your Smart PSS program, you’ll return to the Add

Device tab and will see your devices listed.

Modify

Opens Manual Device

Addition window

Device Conﬁguration

Opens Device

Conﬁguration window

Delete

Remove device

You can also remove a device from Smart PSS by checking the box to the left of the device’s

name and clicking on Delete at the bottom of the window.

Clicking on the Next button on the bottom right of the window will take you to the Group

Manager tab. You can also switch between the two tabs simply by clicking on them.

Creating a Group

When you add an NVR or NVR, it will most likely be its own group. However, you can create a

new group using selected cameras from multiple systems up to 36 cameras.

1. Click on the New Group button on the left of the window and name your new group.

2. Choose a NVR, NVR or IP Camera from the Device List on the right. When selected,

all of that device’s channels will display in the middle.

3. Select the cameras that you wish to add to your new group and then click on the <<

button. They will appear in the group’s list of cameras.

4. To add cameras from another device to this group, repeat steps 1-3.

PICTURE 3-70

PICTURE 3-71

HOME PAGE

All of Smart PSS’ functions are accessed through its main window which is referred to as the

Home Page. The functions are divided into three areas; Basic, Extension and Setting.

The ﬁrst area, Basic, is where you’ll ﬁnd the live viewing, search and playback, and alarm

events functions which are the most commonly used. Extensions contains features and

operations not found on your system and Setting allows you to make changes to your NVR

or NVR as if you were at the machine. Clicking any one of the icons will open up a new

window within Smart PSS. You will be able to move between windows by clicking on its icon

at the top of the window. Hovering the mouse over the icon will reveal an X which can be

clicked upon to close that window. Only the Home Page window cannot be exited in that

manner.