WI-FI SECURITY BULLET CAMERA QUICK START GUIDE
WELCOME! Congratulations on your latest purchase and welcome to the Q-See family. Prepare to see the superior clarity and resolution provided by the latest Plus Series Wi-Fi Bullet Camera. This packet includes everything you will need to help get your camera up and running right out of the box.
WHAT’S INCLUDED FEATURES BEST IN CLASS Setting the resolution bar higher than 1080p NIGHT VISION See what’s happening in pitch dark EASY SETUP Less fuss, more monitoring Camera Wi-Fi Antenna Grommet Mounting Hardware Also included: 1 power supply & 1 weather seal (seal is for custom installs) 4 MOTION ALERT Get alerts about important activity SD CARD SUPPORT Internal back up memory for video storage ADD-ON Expand your current surveillance system with ease 5
GET CONNECTED Find the desired location for your camera to be placed. If you are going to be mounting the camera, please use the included mounting hardware to secure the camera firmly to the wall. Please make sure that you test the system completely before mounting the cameras.
STEP 1 The first step to this exciting journey is to register your device on the Q-See Support Portal at www.q-see.com/register. Registering your device will allow you to enjoy the following features: 3 You will receive regular updates about the latest firmware STEP 2 DOWNLOAD & INSTALL THE QC VIEW APP NOTE: Ensure that your mobile device is connected to the Wi-Fi network you wish to use for your camera. version of your camera.
STEP 3 STEP 4 In Device Manager, Click “+” to add a new device. Configure the network settings by entering the password of your Wi-Fi network. ADD A NEW DEVICE Select “Wi-Fi configuration” and create a name for your camera. Tap the QR code icon in the SN field and then scan the QR code located on the back camera panel (see photo below).
STEP 6 STEP 7 Your camera has been set up successfully. You can now access your camera feed anytime and anywhere using the QC View App. If you would like to add this camera to your existing QC Series NVR, login to your NVR and go to Remote Devices. Select your camera from the device list and click Add. The camera feed will appear on your NVR. The NVR has to be connected to the same network as your mobile device for the initial setup process. Visit www.q-see.
ADDITIONAL FEATURES SD MEMORY CARD The SD memory card slot is located under the bottom panel of the camera. Push the card in firmly to load the card. To eject, press the card firmly again. Some units will include an SD card. CAMERA RESET BUTTON If you wish to change the existing Wi-Fi network to a different network, while the camera is powered on, hold the reset button for five seconds and setup your camera again.
