Technical Manual

22 23
SPECIFICATIONS
Specification
Camera Image Sensor 1/4” EXviewHAD CCD II
Eective Pixels NTSC: 976(H) × 494(V) PAL: 976(H) × 582(V)
Horizontal Resolution Color: 650TVL; B/W: 700TVL
Scanning System Interlacing
Electronic Shutter Speed 1/1s ~1/100,000s
Min. Illumination Color: 0.01 Lux/F1.6, B/W: 0.001Lux/F1.6
S/N Ratio More than 50dB
Video Output BNC(1.0Vp-p/75), PAL / NTSC
Camera
Features
Day/Night Auto(ICR) / Color / B/W
Backlight Compensation BLC / HLC / DWDR (Digital WDR)
White Balance Auto, ATW, Indoor, Outdoor, Manual
Gain Control Auto / Manual
Noise Reduction 2D/3D
Privacy Masking Up to 24 Areas
Digital Zoom 16x
Lens Focal Length 3.9 mm~89.7mm (23x Optical zoom)
Max Aperture F1.6~ F3.7
Focus Control Auto / Manual
Angle of View 61.68° ~ 3.06°
Close Focus Distance 100mm~1000mm
Pan/Tilt Range Pan: 0° ~ 360° endless; Tilt: 0° ~ 90°, auto ip
180°
Manual Control Speed Pan: 0.1° ~ 250°/s; Tilt: 0.1° ~150°/s
Preset Speed Pan: 300°/s; Tilt:200°/s
Preset 80(DH-SD) , 255(Pelco-P/D)
PTZ PTZ Mode 5 Pattern, 8 Tour, 5 Auto Scan, Auto Pan
Speed Setup Human-oriented focal length/ speed adaptation
Power up Action Auto restore to previous PTZ and lens status
after power failure
Idle Motion Activate Preset/Pan/Scan/Tour/Pattern if there is
no command in the specied period
Time Task Auto activation of Preset/Pan/Scan/Tour/Pattern
by preset-time
Protocol DH-SD, Pelco-P/D (Auto recognition)
General Power Supply DC24V 3A
Power Consumption 12W - 27W with heater on
Working Environment -40-140F (-40 - 60C) <90% Humidity
Protection Level IP66
QUESTIONS OR COMMENTS? CONTACT US
24/7 TECHNICAL RESOURCES,
KNOWLEDGE BASE AND MORE
www.Q-See.com/Support
Q-See is proud to back all of our products with a conditional service warranty
covering all hardware for 12 months from the date of purchase. Additionally, our
products also come with a free exchange policy that covers all manufacturing
defects for one month from the date of purchase. Permanent upgrading service is
provided for the software.
Liability Exclusions:
Any product malfunction or abnormalities in operation or damage caused by the
following reasons are not within the free service scope of our company:
1. Equipment damage caused by improper operation.
2. Improper equipment operation environment and conditions (e.g., improper
power, extreme environmental temperatures, humidity, lightning and sudden
surges of electricity).
3. Damage caused by acts of nature (e.g., earthquake, fire, etc).
4. Equipment damage caused by the maintenance of personnel not authorized
by Q-See.
5. Product sold over 12 months ago.
In order to fulfill the terms of your warranty, you must complete the registration
process after purchasing our product. To do this, simply fill out the User’s
Information Card on our website at www.Q-See.com
Q-SEE PRODUCT WARRANTY