Quick Installation Guide 19” LCD Observation System With Built-in 8 Channel Network DVR, H.
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QR40198-403 PART 1 - PACKAGE CONTENTS: 19” LCD Observation System QR40198 Power Supply For Observation System Software CD 4 - Color CCD Cameras with Stands 2 – QSDS14273 (6mm) 2 – QSDS14273W (3.6mm) Power Supply & 4 -Way Splitter For Cameras Ethernet Cable 1|Page Pre-Installed Hard Drive User’s Manual Camera Cables (4 Included) Multi I/O “L” Adapter USB 2.
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QR40198-403 PART 2 - OBSERVATION SYTEM CAMERA AND POWER CONNECTIONS Please note that it is STRONGLY recommended to use a surge protector that is UL-1449 rated. Look for a clamping voltage of 330 or lower, a Joule rating of at least 400 and a response time of 10 nanoseconds or less.
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QR40198-403 PART 3 - OBSERVATION SYSTEM CONTROLS: FRONT PANEL 1 2 Buttons/ Indicators ON/OFF MENU 3 Up 4 Down Item Marks ON/OFF MENU UP Functions Turns the screen on or off. Opens the Main Menu screen. Move up DOWN Move Down PART 4 - ACCESSING THE DVR MENUS Push MENU from the DVR front panel, or remote. The Main Menu offers the following Setup Features: CAMERA: Setup name display, position, image view, and record quality of each channel (cameras).
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QR40198-403 PART 5 - SETTING UP CAMERAS FOR VIEWING AND RECORDING From the Main menu, select CAMERA. Here you can setup the name display (up to 8 characters) and position of each channel (cameras). Select COLOR SETUP to adjust the image brightness, saturation, contrast and hue settings for each channel (camera). You can also choose whether each channel can be previewed in LIVE MODE and/or RECORDING MODE.
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QR40198-403 Manual Recording: From the Record Setup screen set the Rec Mode to “ALWAYS”. Your DVR will continuously record and separate files will be created with the Pack Time intervals you selected. Time Schedule Recording: From the Record Setup screen, set the Rec Mode to “TIME SCHEDULE RECORD” and click “SCHEDULE” in green. This will display the Schedule menu (see below image). Select the channels (cameras) that you wish to record on a schedule.
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QR40198-403 Next, click on the MD AREA SETUP button, which will display the picture on the left. This option allows you to select the area you want to be sensitive to motion. The area in red is sensitive to motion. You can set this area by using the mouse or REV, FWD, and SEL keys on the front panel. Once you have set the area, right click with the mouse or push the ESC key to save the setting.
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QR40198-403 PART 8 - BACKING UP THE VIDEO ON THE DVR Attach a USB flash drive or USB hard drive to the USB backup port and follow the instructions in Part 8 to go to the File List in the Search menu. If you want to backup a single recorded file from the file list, from the File List dialog box pictured above, select the file you wish to back up by placing a check mark in the accompanying green box and hit the [BACKUP] button on the right of the screen.
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QR40198-403 Questions or Comments? Contact Us: Mailing Address: Customer Service: DPS Inc. 8015 E. Crystal Dr. Anaheim, CA 92807 Phone: 877-998-3440 x 538 Email: cs@dpsi-usa.com Live Chat from our Website Website: Tech Support: http://www.q-see.com Fax: 714-998-3509 Phone: 877-998-3440 x 539 Email: ts@dpsi-usa.