Remote Monitoring Guide

14
4. After finishing the installation, click the icon named “Asee” shown as PICTURE 4 to run
the program.
5. Now you are allowed to enter into the program screen shown as PICTURE 5.
PICTURE 4 PICTURE 5
Click CH button [Pull-down menu] to select the channel you need to monitor
Click CONNECT button to enter into the live image of the channel you selected
Click SETUP button to allow you set parameter of the mobile viewer
FUNCTIONS buttons in the bottom from Left to right in turn are:
PTZ DIRECTION (left, right, up, down)
AREA SELECTION (Zoom+, Zoom-)
FOCUS (Focus +, Focus-)
IRIS (I+, I-)
SNAPSHOT
Note: Please make sure you have the right PTZ parameter setting (for details please refer to PTZ section of
the DVR User’s Manual) on DVR, then you can control the PTZ camera through your mobile phone.
The captured images will be saved to the defaulted path (Explorer/ Program/Files/
Moveeye/Photo file).
When you use this program for the first time or need to
change parameter settings, please click SETUP button
to enter into the window shown as PICTURE 6.
User’s Name: herein indicate the user name which
have been set on DVR-[Mobile Set] menu.
Password: herein indicate the password which
has been set on DVR-[Mobile set] menu.
Server address: indicate public IP address connected
to DVR or dynamic domain name used by DVR
Port: indicate the Mobile port which has been set
in your DVR Mobile Menu
Channel: Select one channel you want to monitor PICTURE 6
RemoteMonitorGuide.indd 14 10/20/2010 4:43:39 PM