Technical Manual

MONITOR
电源
DVR
监视器
电源
摄像机
E. DIMENSIONS：
Indoor Color CMOS Dome
Camera
CCTV SYSTEM
●
Do not open the cover of the camera It will no longer be
waterproof if it is ipened.
（
a
）
Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or covers.
There are no user serviceable parts inside. Ask a qualified service
person for servicing.
（b）Handle the camera with care.
Do not abuse the camera. Avoid hitting, shaking, etc.
The camera could be damaged by improper handling or storage.
（c）Do not use strong or abrasive detergents when cleaning the
camera body.
Use a dry cloth to clean the camera when dirty .
In case the dirt is hard to remove, use a mild detergent and wipe
gently.
（d）Do not use the camera beyond the prescribed voltage range.
Ensure the input power source voltage is conforms to the local
city voltage. Higher voltage could fuse the power supply, Lower
voltage could cause abnormal performance.
（e）Do not aim strong light directly into the camera, it will prevent
the camera from producting effective video.
A. PRECAUTIONS：
THIS CCTV COLOR CMOS CAMERA Introduces advanced CMOSand digital
technology, and offers customers a high quality and high resolution picture.
Compared with the old chipset, the sensitivity, smear, dynamic range and S/N are
improved drastically.
High-resolution 1/4" CMOS image sensor with image resolution of
400TVL.
Automatic white balance function enables the camera to produce
correct and nature colors in any light conditions, by automatically
adjusting the white balance point.
The high performance digital-processing chip greatly improves the
signal-to-noise ratio and distortion
B. FEATURES：
（
b
）
One monitor system with two or more cameras
：
（a）One monitor system with one camera：
Video monitor
AC ADAPTER
CAMERA
Video monitor
AC ADAPTER
CAMERA
C. CONNECTION：
COLOR 1/4" CMOS
NTSC:648(H)×488(V) PAL:648(H)×488(V)
400TVL
Internal
Interlace 2:1
NTSC: 1/60s~1/100000s PAL:1/50s~1/100000s
Auto
0.45
1.0Vp-p 75Ω, BNC connection
0 Lux/F2.0 (When IR LEDs on)
Indoor use only
Auto
Auto
<DC12V 500mA
<2W
3.66×2.51 in (93×64 mm)
-10℃～+50℃ (14°F to 122°F) RH 95% Max
≥48dB
Scanning system
Sync System
Electronic Shutter
White Balance
Image Sensor
Effective Pixels
Horizontal Resolution
Viewing Angle
Waterproof level
S/N Ratio
Gamma
Video Output
Usable Illumination
Power Supply
Power Consumption
Operating Temp
AGC
BLC
Dimension
D. SPECIFICATIONS：
Indoor use only.
www.q-see.com
WARNING
To prevent fire or shock hazard do not expose the
insides of the unit to rain or moisture.
!
This symbol alerts the user to the presence of important operating
and maintenance issues according to the manual.
SA 1966
This symbol alerts the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock .
SA 1965
CAUTION:
To prevent electric shocks and
risk of fire hazards, only use the power
supply specifled for unit.
CAUTION:
TO REDUCE T HE RISK OF ELECTRIC SHOCK DO NOT
REMOVE COVER (OR BACK) NO USER-SERVICEABLE
PARTS INSIDE REFER SERVICING TO QUALFIED
SERVICE PERSONINEL
CAUTION:
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
MODEL: QSDNV
Use for ceilling, elevator, bus etc.
This chip features a field period readout system and an electronic
shutter with variable charge-storage time.
5.2 oz (148g)
Weight
Lens
Fixed 6.0mm(30°-35°)
6.0mm lens
＜3.6W
●
Do not aim the camera at bright or strong light sources, this
will make the camera ineffective in capturing pictures.
Caution
●
Please keep the camera within the limits of the assigned
voltage and electric current.
●
Please use the camera only in applications with temperatures
below 70
°
C(158
°
F).
● Please use the right electric cable to power the camera.
● Don't use corrosive substances to clean the glass.
φ5 LED, 12pcs
IR LEDs Distance
IR LEDs Amount
30ft