Technical Manual

QSDT8DP DVR User’s Manual

3.3.4 Motion Detection Recording

This unit supports recording channels and PTZ linking. This means it will

record any cameras, or trigger any speed dome to preset or do auto cruise

once motion is detected on the camera’s channel.

STEP1 Enter MOTION configuration, see Fig 3.10 Motion Detection Setup.

Select cameras

Fig 3.10 Motion Detection Setup

STEP2 Enable Detection first. Enter Area to set Sensitivity and detection

Area. In detection area, red means not active, transparent means active, see

Fig 3.11 Motion Detection Area Setup.

Fig 3.11 Motion Detection Area Setup

STEP3 Enter Trigger configuration, see Fig 3.12 Alarm Out Setup

Fig 3.12 Alarm Out Setup