Technical Manual

QSDT8DP DVR User’s Manual
69
③ Enable all the sub options under “ActiveX controls and plug-ins”
④ Then click ok to finish setup.
b. Other plug-ins or anti-virus programs may be blocking ActiveX. Please uninstall or
close them
NOTE:
On many systems you many have another option. You can go
into internet options in Internet Explorer, enter the IP address you use
to access the DVR as a trusted site, then go to the default level button
and set move the bar down to the low setting, click apply and ok. Do
not select the option to enable protected mode or require server
verification. On Vista you may get an “unknown publisher or publisher
can’t be verified” error message. If you get one of these messages you
need to go to the advanced tab, down to the security settings, put
checkmarks in the options to allow active content to run on my
computer, and allow software to run or install even if the signature is
invalid, and remove the check for the option to check for signatures on
downloaded programs.
.
Q8: What can I do when the DVR starts and displays “please wait……”all
the time?
First possible reason: hard drive power cable and/or data cable are not
securely connected.
Solution: Please check the cable connections and make sure they are
secure; if still not working, please unplug them and then plug them in
again.
Second possible reason: The system is having problems reading the hard