Technical Manual

QSDT8DP DVR User’s Manual

CHAPTER 2 Hardware Installation

Note: Check the unit and the accessories before using the DVR.

Please disconnect the power before connecting to other devices. Don't hot plug

in/out

2.1 Installing Hard Drive

Note: 1. Supports two SATA hard drives.

2. Please calculate HDD capacity needed according to the recording setting.

Please refer to “Appendix B Calculate Recording Capacity”.

STEP1 Unscrew and open the top cover

STEP2 Connect the power and data cables. Place the HDD onto the

bottom case as below.

Fig 2.1 Connect HDD

STEP3 Screw in the HDD as shown below.

Note: For easier installation, please connect the power and data cables

first, and then screw HDD to base.

Fig 2.2 Screw in HDD