Remote Monitoring Guide

PART 3: SIMPLE PORT FORWARDING
Download the FREE Simple Port Forwarding program from:
http://www.simpleportforwarding.com/download
STEP 1. Click on Download in any of the mirrors or the Direct Download link to download
and install this program.
STEP 2. Once the program is installed,
go to the Windows Start Menu
(Windows icon in the lower left of
your monitor) and look for Simple
Port Forwarding in the program list.
Click on the program to launch it.
STEP 3. Once Simple Port Forwarding has launched, select your router from the list.
The default Router IP and Login information will automatically come up. If you have
previously changed the login information, then you will have to enter it manually
STEP 4. Click on “+” at the bottom to open the window allowing you to set your ports.
PICTURE 9
PICTURE 11
PICTURE 10
STEP 5. Click on ADD CUSTOM.
STEP 6. Input the required information:
Name: (You can name your DVR if you
wish)
Type: TCP
Start Port: 80
End Port:80
IP add: IP of DVR obtained in
Part 1.
Click on ADD
Repeat for port 1159 and 1160.
PICTURE 12
PICTURE 13