Technical Manual

25
Step 3－Cable connection
Step 4－Mount the dome to the ceiling
Step 5－Install transparent dome
5.3 Pendant Dome Installation
Step 1 —— Draw holes
Draw four holes in the desired location
in the wall in accordance with the four
holes of bracket-anchor.
Match the slit the camera fixing
bracket with the lock on the camera,
and mount the camera onto the
camera fixing bracket.
Turn the camera in the lock
direction until the lock tab of the
camera fixing bracket meets the
lock line of the camera.
Remove protective coating of
transparent cover.
Please refer to chapter three cable
connections.
Push bracket anchors of the shell to
insert the dome core. When the
bracket anchors are fully pulled in,
open the bracket anchors and fix the
bolt in white cable centre. Please
ensure you have mount the dome
core in the ceiling tightly.
Note: For security reasons a prevent belt
is needed between the dome cover and
the ceiling
(The prevent belt is not
included in the accessory package)