Technical Manual

You can enter the dome menu directly.

Use up and down key to view the function keys. Click confirm button to go to the

submenu.

Highlight exit button and click confirm to leave the menu.

6.3.2 For PELCO-P/D

Please recall 28 or 95 preset to enter dome menu.

Move joystick up and down to view function keys.

Press aperture zoom in key (usually it is “open” key) to enter the submenu.

Highlight exit and press aperture zoom in key to leave the menu

Note:

z For PELCO-P/D, please exit first before you enter PTZ control.

z Keyboards or matrix operation may have slightly differences. Please contact

local retailers for more information.

Open the main menu the above figure will pop up. See Figure 18.

z SYSTEM INFORMATION：Address location, temperature and so on.

z CAMERA PARAMETERS：Digital zoom focus

z FUNCTION SETTING ： preset /scan/tour/pattern

z ALARM SETTING ：Alarm setup

z DEVICE CONTROL ： Fan and heater control

z EXIT ： Leave the system menu

6.4 Menu Operation

In menu, you can use the following four functions to configure or leave system

menu.

z In main menu, move joystick (or use direction keys) to the desired items.

Move left /right key to configure.

z When current item are highlighted, please click confirm button to go to the

sub menu or use left/right key to configure setup.

z Highlight back button and click confirm butto to go back to the previous menu.

z Highlight exit and click confirm button to leave system menu

6.4.1 Dome Information Setup