Technical Manual

35
DIGITAL ZOOM ：ON
MANUAL FOCUS ：ON
AUTO IRIS ：ON
BRIGHT ：↑
BLC ：ON
WB.MODE ：MANUAL
R．GAIN ：↑
B．GAIN ：↑
BACK
EXIT
Figure 21 Address setup
Highlight SITE INFORMATION and click confirm button.
z ADDR TYPE: there are two address types: soft and hard.
z Soft address: you can use menu to modify address setup.
z Hard address: you can not change address setup here.
z ADDR-SOFT: Here is to set dome soft address. The value ranges from 1 to
255.
Note: You can not use menu to modify address.
6.4.2 Camera Setup
Figure 22 Camera setup
Highlight PARAMETERS CAMERA and click confirm button
z DIGITAL ZOOM：There are two digital zoom settings: auto or manual.
z MANUAL FOCUS: There are two manual focus settings: auto or manual
z BRIGHT: click left or right key to change camera brightness
z BLC：Back light compensation function. There are two settings: on or off.
z WB.MODE：White balance function. There are two settings: on or off.
z R．GAIN：This function only becomes activated when WB.MODE is set to
manual mode.
z B．GAIN：This function only becomes activated when WB.MODE is set to
manual mode.
6.4.3 Dome Function Setup
ADDR
TYPE :HARD
ADDR-HARD :001
ADDR-SOFT :255
BACK
EXIT