Technical Manual

1 Features and Functions

1.1 Features

Integrated dome system has the following features:

z High resolution integrated digital processing camera.

z Build in PTZ and digital decode card.

z RJ485 data port for software update.

z Digital control and programmable

z Simple and effective transmission system

z Locate, trace and scan object easily.

z Support DH-SD and Pelco-P and Pelco-D protocol

z Simple and user-defined interface.

z On-screen display menu for setup of programmable functions.

z Working with DVR to realize auto touring and auto pattern.

1.2 Function

Integrated dome system has the following functions:

1.2.1 On-Screen Menu

It is easy for you to view dome information and configure dome, camera

parameters.

1.2.2 Support multiple protocols function

This series speed dome support Chinese national industrial standard and

universally used protocols PELCO-P and PELCO-D. You can use various

devices and protocols to operate speed dome.

1.2.3 Proportional Pan and Tilt

This function keeps the image from moving too fast when there is a large amount

of zoom.

Dome continually decrease or increase pan and tilt speeds in proportion to depth

of zoom. When zooms speed is increasing, the camera moving speed becomes

slow. When zooms speed is decreasing, the camera moving speed becomes fast.

1.2.4 On-screen Tips

Here you can view:

z Dome title and system version (Software and hardware)

z Dome system temperature

z Dome protocol, baud rate, address

z Dome pan/tilt coordinate, preset ID

1.2.5 Preset Setup and Recall

Preset function is to save the address information (such as PTZ pan/tilt, focus

and etc) to the memory so that you can quickly adjust the dome and PTZ to the

correct position. This series speed dome supports 80 presets.

1.2.6 Auto Scan

Camera scans back and forth regularly in a horizontal field. Here you need to set

left and right limit and scan speed. You can set 5 scanning paths.

1.2.7 Auto Touring